| ausmini https://ausmini.com/forums/ |
|
| 7 port mini sport https://ausmini.com/forums/viewtopic.php?f=5&t=17492 |
Page 1 of 1 |
| Author: | dj_brophy [ Thu Mar 23, 2006 7:52 pm ] |
| Post subject: | 7 port mini sport |
hey hey ive just got my 7 port minisport head. (aka...akm) does any one know the jetting settings for these heads.... got 40dhla dellortos 544 cam had head modified slightly roller rockers. ect just basic ball park settings would same me alot on the dyno when i fit it thanks daniel 
|
|
| Author: | TheMiniMan [ Thu Mar 23, 2006 10:49 pm ] |
| Post subject: | |
man i must say that i`ve absolutely no experience with those heads what-so-ever, (Who has here in oz? ) but i`d just bung 2x std mini webber/dellortos on & see what happens
can`t be too far wrong really, probly will want to change maybe the emulsion tubes after the dyno run but can`t see why you`d have to change much else suck it & see
|
|
| Author: | Gadgets mini [ Fri Mar 24, 2006 1:01 am ] |
| Post subject: | |
Piccies please 
|
|
| Author: | mickmini [ Fri Mar 24, 2006 8:46 pm ] |
| Post subject: | |
find out what jetting they use for datto 1200 or toyota 1200 engines of similar spec with twin 40mm carbs and you would be able to start from there |
|
| Author: | minicranks [ Tue Mar 28, 2006 3:36 pm ] |
| Post subject: | |
ask minisport they might be able to point you in the right direction. |
|
| Author: | meeni [ Wed Mar 29, 2006 3:23 pm ] |
| Post subject: | |
yer ask minisport, or if they are no help try a brittish forum like www.minifinity.com  they might know more as they arent to common out here
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|