ausmini https://ausmini.com/forums/ |
|
is it possible to lengthen the seat rails? https://ausmini.com/forums/viewtopic.php?f=5&t=16236 |
Page 1 of 2 |
Author: | PuR3_\/\/3$t [ Wed Feb 15, 2006 7:35 pm ] |
Post subject: | is it possible to lengthen the seat rails? |
as title suggests, is that possible so the seat moves back further? if not how do all you tall mini owners cope? |
Author: | Siclad [ Wed Feb 15, 2006 7:40 pm ] |
Post subject: | |
im now 6'7" and i run on the "normal" seat rails, just i set them back as far as they go (the third hole)... although when im in the passenger side and am sitting upright passers by can see my knees about the window sill ![]() i would be keen to find out how to get the longer rails too ![]() |
Author: | PuR3_\/\/3$t [ Wed Feb 15, 2006 7:43 pm ] |
Post subject: | |
so ur drivin 1 at 6 foot 7 no worries..im a little shorter than that..couple of inches so i should be ablt to aswell |
Author: | Siclad [ Wed Feb 15, 2006 7:57 pm ] |
Post subject: | |
![]() |
Author: | PuR3_\/\/3$t [ Wed Feb 15, 2006 8:09 pm ] |
Post subject: | |
bout 6'3" or there abouts |
Author: | Siclad [ Wed Feb 15, 2006 8:12 pm ] |
Post subject: | |
ur a midget! ![]() chowdesu on here is taller than i ![]() ![]() |
Author: | PuR3_\/\/3$t [ Wed Feb 15, 2006 8:18 pm ] |
Post subject: | |
haha sound good..i want to buy a mini but the parents dont think ill fit even know dad used to drive 1 and hes alot taller than me |
Author: | Siclad [ Wed Feb 15, 2006 8:25 pm ] |
Post subject: | |
my parents had the same attitude at first ![]() BUT, i am still interested in knowing how to get longer rails. would it just be a case of making new ones with the longer arms? would these then be too "flimsy"? |
Author: | TurboOrangie [ Thu Feb 16, 2006 1:37 am ] |
Post subject: | |
Either buy a set of these, or maybe make some that will allow you to move the seat even further back, this technology should be possible even at home. http://www.minimania.com/web/Item/BG500 ... Detail.cfm |
Author: | NoMoreMinis [ Thu Feb 16, 2006 5:54 am ] |
Post subject: | |
If you move the seat back further, i'm pretty sure you will have to 'modify' the storage compartment in the back.... |
Author: | sports850 [ Thu Feb 16, 2006 6:30 am ] |
Post subject: | |
Pretty sure these come up on ebay from time to time guy's so keep an eye out or get something similar made up . |
Author: | Siclad [ Thu Feb 16, 2006 10:23 am ] |
Post subject: | |
NoMoreMinis wrote: If you move the seat back further, i'm pretty sure you will have to 'modify' the storage compartment in the back....
![]() |
Author: | aznpride [ Thu Feb 16, 2006 10:37 am ] |
Post subject: | |
I've also wondered about this. I'm only 6'1 same with the old man we've adjusted the seat to the last notch which has helped. Only thing I have to change now is the steering wheel. It's like a bus wheel. |
Author: | awdmoke [ Thu Feb 16, 2006 11:10 am ] |
Post subject: | |
I fitted a pair of MX-5 seats into a clubby, using the longer mazda rails welded on top of the clubby "retaining bar" Heaps of travel, plus tilt/reclining/lumbar adjustment ![]() Can post pics if anyone is interested... |
Author: | PuR3_\/\/3$t [ Thu Feb 16, 2006 2:45 pm ] |
Post subject: | |
sounds good mate |
Page 1 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |