how easy is it to fit a rev counter on a 998 ?
| ausmini https://ausmini.com/forums/ |
|
| rev counter https://ausmini.com/forums/viewtopic.php?f=5&t=15981 |
Page 1 of 1 |
| Author: | sean [ Tue Feb 07, 2006 11:48 pm ] |
| Post subject: | rev counter |
how easy is it to fit a rev counter on a 998 ?
|
|
| Author: | DarkenMini [ Wed Feb 08, 2006 1:40 am ] |
| Post subject: | |
Very easy Man ummm But soz i cant telll ya what wires go to weres. Umm one to power and one to the Light and one to the side of the coil. And thatas about it i Fitted one in about 10mins But i think it did it dodgy Cause i wired up the Tach thru the switch Panel and attached to the lights. so it only runs on light when i need light But i think Its a Sweet setup But i just need to re atach The tach to a new Dash im Thinking about. But Id like to get the New autometer guages in the classic Styling and gold trim Or white silver Maybe i should ask my jewler Friend to Do some custom guage surrounds (good idea daz CHHHEEEERRRRING MATE). i will have to look into it and ask him. |
|
| Author: | Idearat [ Wed Feb 08, 2006 3:29 pm ] |
| Post subject: | |
tachs are easy as pie to attach to any car, and only one wire more if you have injection... takes 15-20mins to mount attach and test. |
|
| Author: | sean [ Wed Feb 08, 2006 10:42 pm ] |
| Post subject: | |
Thanks glad its easy - sick of hard jobs 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|