I have the redline manifold and am just waiting for the gasket kit and carb to arrive, and was wondering if the linkage kit from redline would work? Is the linkage kit for the weber and dellorto the same?
Thanks in advance
| ausmini https://ausmini.com/forums/ |
|
| Weber & Dellorto Linkage Kit the same? https://ausmini.com/forums/viewtopic.php?f=5&t=1503 |
Page 1 of 1 |
| Author: | spathi [ Thu Aug 12, 2004 7:15 am ] |
| Post subject: | Weber & Dellorto Linkage Kit the same? |
I have the redline manifold and am just waiting for the gasket kit and carb to arrive, and was wondering if the linkage kit from redline would work? Is the linkage kit for the weber and dellorto the same? Thanks in advance
|
|
| Author: | drmini in aust [ Thu Aug 12, 2004 7:20 am ] |
| Post subject: | |
I got a Lynx Weber linkage kit on my Dellorto- so yeah, I think so. Only variation would be the arm on the carb. 
|
|
| Author: | spathi [ Thu Aug 12, 2004 8:24 am ] |
| Post subject: | |
Thanks Kev
|
|
| Author: | drmini in aust [ Thu Aug 12, 2004 7:32 pm ] |
| Post subject: | |
Here's a pic of mine- linkage is at least 10 years old, all I've replaced since is the black plastic rod ends (rose joints) that hold the horizontal shaft (one broke at Wakefield Pk and I drove home using a virtual bearing made of cable ties..) 
Now it has proper steel joints. Kit was on a Lynx manifold before I swapped to the Redline one. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|