ausmini
https://ausmini.com/forums/

block numbers
https://ausmini.com/forums/viewtopic.php?f=5&t=13628
Page 1 of 1

Author:  cbs [ Thu Dec 01, 2005 7:08 pm ]
Post subject:  block numbers

Hi there, I have just got myself another mini after about 10 years. The trouble is i'm having trouble finding info out about the block numbers and size (got 2 with car) anyway can anyone tell me where to find out the info?. Both blocks have 12A497. Gbox 1 = wyf 22g1832 e641, Gbox 2 = a/bz 5 bc&m 22g 1832. Head 1 = ecam 4004, not sure about other head. The car is a 74 clubman, so possibly motor in car is 998? Thanks in advance!

Author:  poeee [ Thu Dec 01, 2005 7:11 pm ]
Post subject: 

What are the engine numbers? As far as I know, both the 1100 and 998 blocks had the same cast number, as they are the same block! 8)

Author:  cbs [ Thu Dec 01, 2005 7:14 pm ]
Post subject: 

Not sure, will have a look in morning unfortunatly I have to go to work now, so will post them, thanks

Author:  CPOCSM [ Fri Dec 02, 2005 7:54 am ]
Post subject: 

998cc(AUSSIE)had 99H and the 1100 had 10xx(something something). The cylinder head is a pollution head for 998cc

Numbers are confusing, my VIN on the mini says it is a Sunshine(ridgy didge) but would love a sunroof now the hot weather in the capital is here. However it is badged a "S" and still looking for the seam...

Hooroo

Rob Forsyth
Miniot!!

Author:  cbs [ Fri Dec 02, 2005 2:27 pm ]
Post subject: 

Hi there again. Got the block numbers. Both have 12A 497. Motor 1 has B23E3 at back on t/cover side and on front has half there casting number of something something 7, possibly ... 8 7
Motor 2 has 86 LT on rear t/cover side and ... 9 8 on front, 998?
Thanks all

Author:  feralsprint [ Fri Dec 02, 2005 2:43 pm ]
Post subject: 

The number people are looking for is on the top of the block stamped in to the little flat section where the alternator/generator mounts on :D

Author:  cbs [ Fri Dec 02, 2005 3:52 pm ]
Post subject: 

Sorry about that folks, i'm still learning stuff :oops: Anyway went back outsideto look.
Motor 1 has 99H889AJH 000509
Motor 2 has 1015 / 2600
Thanks :wink:

Author:  fuzzy-hair-man [ Fri Dec 02, 2005 4:26 pm ]
Post subject: 

First one is a 998, the second is an 1100 :wink:

here's a useful link if you want to know more:
http://www.hotbricks.org.au/files/engine.txt

Author:  cbs [ Fri Dec 02, 2005 5:17 pm ]
Post subject: 

Thanks for the help folks. Now I know what I am dealing with :D

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/