ausmini
https://ausmini.com/forums/

what the hell is this thing?
https://ausmini.com/forums/viewtopic.php?f=5&t=13085		 Page 1 of 1
Author:  inazuma_x [ Sat Nov 12, 2005 7:50 pm ]
Post subject:  what the hell is this thing?
is this a brake booster or something?

http://imagestore.ugbox.net/aview/eedb2 ... f47fbaa17e

it seems that i have to remove it in order to get the front subframe out...is this the case?
Author:  monrel [ Sat Nov 12, 2005 7:55 pm ]
Post subject: 
I think it's a horn.
Author:  inazuma_x [ Sat Nov 12, 2005 7:58 pm ]
Post subject: 
spose that would make sense...i'll take it out either way :P
Author:  mickmini [ Sat Nov 12, 2005 8:22 pm ]
Post subject: 
yep its a horn - never seen one down there before though
Author:  meeni [ Sat Nov 12, 2005 8:37 pm ]
Post subject: 
yer thats the horn, my deluxes one is there too, thats the only mini that has em there i think, the rest are on the other side on the inner guard to my knoledge, but yer, just a horn
Author:  drmini in aust [ Sat Nov 12, 2005 8:41 pm ]
Post subject: 
BMC carefully positioned it there to make it bloody near impossible to get the oil filter out. Without spilling it. :lol:
I guess at least it doesn't crack the bodywork and fall off, like Clubby ones- including ours did. :wink:
Author:  inazuma_x [ Sat Nov 12, 2005 11:39 pm ]
Post subject: 
was a bit surprised...especially since the passenger side brake lines go right under it...hence why i thought it was a brake booster or something...do i just undo the nut ontop? or is there some other way of getting it off?
Author:  gafmo [ Sun Nov 13, 2005 5:30 am ]
Post subject: 
its attched to the subframe underneath..nut and bolt

get the jack and axle stands out :wink:
Author:  clubby123 [ Mon Nov 14, 2005 7:38 pm ]
Post subject: 
hehe yer definately a horn :oops:
Author:  inazuma_x [ Tue Nov 15, 2005 7:57 am ]
Post subject: 
can it be reconfigured to play la cucaracha? :lol:
Author:  Matt68 [ Tue Nov 15, 2005 1:37 pm ]
Post subject: 
Hi

Just get a 7/16 socket (1/4" drive is best with a 2" extension.) into the spce under the lip of the subframe to hold the nuts, then use a 7/16" spanner to turn the bolt on the outside of the subframe and the whole thing lifts away. (2 bolts in the horizontal plane)

Matt
Author:  Lillee [ Tue Nov 15, 2005 8:23 pm ]
Post subject: 
Go air horns! if they can't see you, they definately will hear you! :wink:
Author:  inazuma_x [ Wed Nov 16, 2005 7:56 am ]
Post subject: 
as long as they play la cucaracha....I'M THERE!
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/