ausmini
https://ausmini.com/forums/

whats next
https://ausmini.com/forums/viewtopic.php?f=5&t=12561		 Page 1 of 2
Author:  clubby123 [ Thu Oct 27, 2005 3:41 pm ]
Post subject:  whats next
after getting my twin SUs and extractors what do i do next???? :?
Author:  willy [ Thu Oct 27, 2005 3:44 pm ]
Post subject: 
Bolt them on.
Author:  GT1360 [ Thu Oct 27, 2005 3:52 pm ]
Post subject: 
take the POS twins off and get a good single... 1.75" or weber or del...

nad a 2" ZORST IS A LITTLE BIT OF OVERKILL ON A 1100 :?
Author:  awdmoke [ Thu Oct 27, 2005 4:51 pm ]
Post subject:  Re: whats next
clubby123 wrote:
after getting my twin SUs and extractors what do i do next???? :?

Drive it and enjoy it :D

If after a while you get used to your new power, you could look at upgrading ignition/head/cam. Probably in that order. That's in order of cost too :wink:
Author:  GT1360 [ Thu Oct 27, 2005 5:05 pm ]
Post subject:  Re: whats next
Quote:
If after a while you get used to your new power, you could look at upgrading ignition/head/cam. Probably in that order. That's in order of cost too :wink:


What... :? ign/head/cam in that order of price.. :? dreaming....

cam/ign/head :wink: [/quote]
Author:  awdmoke [ Thu Oct 27, 2005 5:17 pm ]
Post subject: 
Bah, $40 for Pulsar dizzy/coil/leads.

and as for head, well they probably charge you extra unless it's dark :P :lol: :lol: :lol:
Author:  GT1360 [ Thu Oct 27, 2005 5:20 pm ]
Post subject: 
awdmoke wrote:
Bah, $40 for Pulsar dizzy/coil/leads.

and as for head, well they probably charge you extra unless it's dark :P :lol: :lol: :lol:


pfff.. cam $200 tops.. edis progamable ignition.. 400 tops.. head.. 1K of nice ports and big ass valves. 8)
Author:  awdmoke [ Thu Oct 27, 2005 5:30 pm ]
Post subject: 
GT1310 wrote:
blah blah blah.. head.. blah blah nice big ass blah


We're talking about what's next for Ben, not for you!

:P
Author:  GT1360 [ Thu Oct 27, 2005 5:32 pm ]
Post subject: 
yeah. good parts for a mini.. not crap parts for your moke.. :roll:
Author:  Angusdog [ Thu Oct 27, 2005 5:38 pm ]
Post subject: 
I found this this bookmark today. Scroll down until you see What BOLT ON modification gives the best increase in performance:. From David Vizzard, who knows more than most. It's the rough advice I'll be following...
Author:  clubby123 [ Thu Oct 27, 2005 5:39 pm ]
Post subject: 
whats involved with the ingnition
Author:  GT1360 [ Thu Oct 27, 2005 5:42 pm ]
Post subject: 
yes and No... its a good guide... but remember how old that is.. there are a few advances in parts these days. :wink:
Author:  fuzzy-hair-man [ Thu Oct 27, 2005 6:01 pm ]
Post subject: 
clubby123 wrote:
whats involved with the ingnition


find the thread on the pulsar dissy conversion, :D you'll know it it's about 20 something pages long :P :lol: good conversion though :wink:

edit: I took pity on you and found it for you:
http://www.ausmini.com/forums/viewtopic.php?t=1498&highlight=d4r85
Author:  GT1360 [ Thu Oct 27, 2005 6:15 pm ]
Post subject: 
or go all out and do the EDIS 4 programable.. :wink: soon to be available in kit form in Aus. 8)

look in a series mods at my sticky about them..
Author:  clubby123 [ Thu Oct 27, 2005 7:09 pm ]
Post subject: 
fuzzy-hair-man wrote:

edit: I took pity on you and found it for you:


Thanks for that
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/