ive got a set of LCB's 4 the van (the were on the old 1100)
just wondering if there is a different size....as i have a 940 head with HUGE ports, looks like they will be the only thing slowing the flow,
only just bought then 3mnths ago
blake
| ausmini https://ausmini.com/forums/ |
|
| 1100-1275 LCB's...are they the same? https://ausmini.com/forums/viewtopic.php?f=5&t=12362 |
Page 1 of 1 |
| Author: | lobby69 [ Thu Oct 20, 2005 8:23 pm ] |
| Post subject: | 1100-1275 LCB's...are they the same? |
ive got a set of LCB's 4 the van (the were on the old 1100) just wondering if there is a different size....as i have a 940 head with HUGE ports, looks like they will be the only thing slowing the flow, only just bought then 3mnths ago blake
|
|
| Author: | drmini in aust [ Thu Oct 20, 2005 8:37 pm ] |
| Post subject: | |
If it's still an 1100 motor, I would keep them on. Most of the Oz made LCBs- Perry etc (NOT Brownrigg) are the same for 850-998-1098-1275. I would not make them too big.. and I hope your 940 head is not ported too big either (going onto a 1098). Maniflow make a small bore LCB (for smallbores), a med bore one (for 1275 etc) and a large bore one (for real big motors/racing).
|
|
| Author: | lobby69 [ Thu Oct 20, 2005 8:58 pm ] |
| Post subject: | |
drmini in aust wrote: I would not make them too big.. and I hope your 940 head is not ported too big either (going onto a 1098). what effects would oversize 940 ports have on an 1100???... thanks, blake
|
|
| Author: | drmini in aust [ Thu Oct 20, 2005 9:50 pm ] |
| Post subject: | |
Won't help torque.....
|
|
| Author: | inazuma_x [ Fri Oct 21, 2005 9:05 am ] |
| Post subject: | |
drmini in aust wrote: If it's still an 1100 motor, I would keep them on.
Most of the Oz made LCBs- Perry etc (NOT Brownrigg) are the same for 850-998-1098-1275. I would not make them too big.. and I hope your 940 head is not ported too big either (going onto a 1098). Maniflow make a small bore LCB (for smallbores), a med bore one (for 1275 etc) and a large bore one (for real big motors/racing). i am looking at getting a set of LCB's and RC40's sometime in the future (next year...not much money left after the panel and paint work...need to save)...i plan on having a real monster motor in the mini eventually...but will be starting off with a 1275 A+ (non-modded) would it be better to plan for the future and get the large bore one? or step it up? i'd rather plan for the future coz a full set in stainless is gonna set me back around $1000 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|