Can anyone give me some drawings or sizes on making the Cooper S Board Holders for the Boot.

I have a boot board and want to hold it in place just the same as a Cooper S is.

_________________
I've Got One
You've Got One
We've All Got One
What Is It



A Bloody Mini

1970 Mini K, 1380cc, 1.75 HIF SU, 30 70 Cam, 2" Zorts
1969 Mini K, Stock Standard and Orginal. (Slow as Hell)

i have some out at the moment i have taken some pics of them with a tape measure. if you pm an email addy i will send them to you (theres a few of them)

ooops email addy there already LOL will send them now. excuse me, im having a blonde day

Are you aware that you can buy these already made ? Most of the Mini shops should be able to supply them.

Might be a stupid question, but how do you prevent these boards from bending? most of the board sits on the spare tyre in the boot but then there is about an inch or so clearance above the battery/rest of the boot floor. Over time, the board bends down on this side. (well it has in my boot at least).

Is it just a matter of chocking it up on this side?

Thats what the bracket is for

_________________
Stop Licking the Dog...I Don't Care Who Started It

bracket..?? This will need explaining..!!

Cooper S had a pair of brackets that the boot board sat on to keep it level.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

The Cooper 'S' Clubman GT had five brackets to hold the boot board in place, Two at the front and three at the rear.

Thanks For the Info I will have to try and make some Now.

Or I Might Try Karcraft and see if they have any also.

But I think If i Make that would give Mine My Own Touch

_________________
I've Got One
You've Got One
We've All Got One
What Is It



A Bloody Mini

1970 Mini K, 1380cc, 1.75 HIF SU, 30 70 Cam, 2" Zorts
1969 Mini K, Stock Standard and Orginal. (Slow as Hell)

did you get all the pics from Danielle?

Yep All are here Now

Thanks.

_________________
I've Got One
You've Got One
We've All Got One
What Is It



A Bloody Mini

1970 Mini K, 1380cc, 1.75 HIF SU, 30 70 Cam, 2" Zorts
1969 Mini K, Stock Standard and Orginal. (Slow as Hell)

Yeah I remember now- it's been 20 years since we owned a `real' one, LOL.
Sold it for $1,400!

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Are you able to send those pics to me too..?

[email protected]

Thanks for sending them to me as well. Do you have a picture of how they are mounted on the actual car? I am imagining that these would join on the outer of the boot (where the boot joins the car) but then what props the board up the other side on the back of the rear seats. Are these screwed into that metal as well?