ausmini https://ausmini.com/forums/ |
|
Are there in cheap starter upgrades/conversions out there? https://ausmini.com/forums/viewtopic.php?f=5&t=11077 |
Page 1 of 1 |
Author: | Beau [ Mon Sep 12, 2005 4:13 pm ] |
Post subject: | Are there in cheap starter upgrades/conversions out there? |
Just wondering of any of you have converted a starter from another car to fit a Mini? Not sure if it has been done, but I thought I would try! Thanks |
Author: | fuzzy-hair-man [ Mon Sep 12, 2005 4:16 pm ] |
Post subject: | |
Holden Gemini starter motor works I am not sure of the specifics of it but if you do a search there is mention of it somewhere on this site.... What is a Holden gemini called in the US? Gemini's had a link with isuzu I think ![]() ![]() |
Author: | speedy [ Mon Sep 12, 2005 4:22 pm ] |
Post subject: | |
The Geminis are called Chevette in the Americas. |
Author: | Beau [ Mon Sep 12, 2005 5:29 pm ] |
Post subject: | |
A chevette? As in the Chevy hatchback? ![]() |
Author: | speedy [ Mon Sep 12, 2005 5:49 pm ] |
Post subject: | |
The T car! ![]() http://www.chevettes.com/ |
Author: | TK [ Mon Sep 12, 2005 6:19 pm ] |
Post subject: | |
Yes the Isuzu starter will work but there is a better one that takes more work to get it to fit, the Honda Civic, it's a corker apparently. I have all the info but it's on my work computer. |
Author: | bnicho [ Mon Sep 12, 2005 7:52 pm ] |
Post subject: | |
Chevette in US had a different engine to the Gemini here. You can use a starter from a 2000cc petrol Trooper or 1600-1800 petrol I-Mark. Maybe an Impulse as well. ![]() (Yes, I'm a closet Isuzu fan!) |
Author: | miniron [ Tue Sep 13, 2005 10:18 am ] |
Post subject: | |
![]() RWD Gemini fits. Needs the mounting holes elongated but interferes with your oil cooler if fitted. Give Link a call. They had them last time I was there. Edit: ![]() Regards RonR |
Author: | Beau [ Tue Sep 13, 2005 10:24 am ] |
Post subject: | |
miniron wrote: :wink:
RWD Gemini fits. Needs the mounting holes elongated but interferes with your oil cooler if fitted. Give Link a call. They had them last time I was there. Edit: ![]() Regards RonR No worries. Chevettes are a tough car to find here. Couldn't find anything from any of the local yards. I was wondering if there were any asian cars that would have soemthing. I don't want to use American car parts. |
Author: | danidad [ Tue Sep 13, 2005 10:04 pm ] |
Post subject: | |
holden gemini is isuzzu bellet or vauxhall chevette i think |
Author: | bnicho [ Tue Sep 13, 2005 10:09 pm ] |
Post subject: | |
danidad wrote: holden gemini is isuzzu bellet or vauxhall chevette i think
Yes, as was said above! ![]() Chevette uses a different engine entirely. The Bellet uses a different starter which does not interchange. |
Author: | danidad [ Tue Sep 13, 2005 10:20 pm ] |
Post subject: | |
point being the chevette is not a chevrolet product as beau suspected but a vauxhall..still GM though.. theres probably a german opel equivelent too... |
Author: | bnicho [ Tue Sep 13, 2005 10:36 pm ] |
Post subject: | |
danidad wrote: point being the chevette is not a chevrolet product as beau suspected but a vauxhall..still GM though.. theres probably a german opel equivelent too...
Yes there is, the Opel Kadett of the same period. But as far as I am aware, the closest thing the US got was the I-Mark which is basically a Gemini to us: ![]() Not sure of exactly what the mechanicals were. |
Author: | speedy [ Wed Sep 14, 2005 2:26 pm ] |
Post subject: | |
Beau; In case you missed this thread http://www.ausmini.com/forums/viewtopic.php?t=11151 Cheers, |
Author: | Besser [ Sat Sep 24, 2005 11:50 am ] |
Post subject: | Gemini starter |
The gemini starter develops a lower cranking torque but achieves this with a 20% lower current draw. Fitting a gemini starter will give the perception of better cranking but there is little diff. I personally did the mod then did the check. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |