| ausmini https://ausmini.com/forums/ |
|
| WHAT CAM https://ausmini.com/forums/viewtopic.php?f=5&t=10317 |
Page 1 of 1 |
| Author: | doorlady [ Sat Aug 20, 2005 5:07 pm ] |
| Post subject: | WHAT CAM |
I am going to fit an 1100 crank to the 998 will I stay with the 998 cam or change to the 1100 cam or are thay the same? |
|
| Author: | drmini in aust [ Sat Aug 20, 2005 5:16 pm ] |
| Post subject: | |
I wouldn't use either... they are both too tame.. Send one to Russell Engineering in North Rocks, and for around $120 he'll regrind it to an RE13 grind. Works great in everything from 998 to 1400cc or more. Best fast road cam I've ever used, and I've tried heaps! 
|
|
| Author: | doorlady [ Sat Aug 20, 2005 5:21 pm ] |
| Post subject: | |
A BIG THANKYOU DOC. ADAM |
|
| Author: | gafmo [ Sat Aug 20, 2005 6:15 pm ] |
| Post subject: | |
I second that motion |
|
| Author: | DarkenMini [ Sat Aug 20, 2005 9:35 pm ] |
| Post subject: | |
what is the power range of a RE13 cam anyways Doc and what does Putting a 1100 crank into a 998 do?? |
|
| Author: | Mini Mad [ Sat Aug 20, 2005 10:25 pm ] |
| Post subject: | |
Can I third the RE-13 motion? 
Power range is from 2700 - 7500+...putting an 1100 crank in a 998 does just that..make it a 1098....also need 1098 pistons.. |
|
| Author: | drmini in aust [ Sat Aug 20, 2005 10:31 pm ] |
| Post subject: | |
Mini Mad wrote: Can I third the RE-13 motion?
Power range is from 2700 - 7500+...putting an 1100 crank in a 998 does just that..make it a 1098....also need 1098 pistons.. It gives it more torque, out of proportion to the 10% increase in displacement. Great for a road car, they soar up hills. If you allow it to breathe they rev nice too. 
|
|
| Author: | poeee [ Sat Aug 20, 2005 11:52 pm ] |
| Post subject: | |
DarkenMini wrote: what is the power range of a RE13 cam anyways Doc and what does Putting a 1100 crank into a 998 do??
The 1100 and 998 blocks are identical, so if you change the 998 crank and pistons to 1100 crank and pistons, it becomes an 1100.
|
|
| Author: | drmini in aust [ Sun Aug 21, 2005 7:01 am ] |
| Post subject: | |
But we call 'em 998 strokers... eh Anton.. 
Barney had one too. Just remember when you do this mod, throw away the tin 998 crank pulley and fit a proper 1098/1275 harmonic balancer.. longstroke cranks need them.
|
|
| Author: | CPOCSM [ Tue Aug 23, 2005 7:31 pm ] |
| Post subject: | |
Crikey - I have the dampener on the 998cc and runs as smooth as a babys bum. The original pulley came apart in 2 pieces about 4 years ago so I just threw the 1275 one on as it was there. Awaiting my RE-13 with bated breath...Sent today...Woohoo And it starts - block and head back at the end of the week and cant wait to get it together before Wagga Hooroo Rob Forsyth Miniot!! |
|
| Author: | J_A_M [ Tue Aug 23, 2005 11:21 pm ] |
| Post subject: | |
Mini Mad wrote: Can I third the RE-13 motion?
yes, and I will fourth it
...and yes Kev, it's a 998 stroker! My rego papers say 998cc
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|