Ausmini
It is currently Mon Jun 23, 2025 8:05 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 19 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Air Con.
PostPosted: Thu Nov 04, 2004 9:18 pm 
Offline
1098cc
1098cc

Joined: Mon Nov 01, 2004 10:19 pm
Posts: 1203
Location: Helensburgh NSW
Is it possible to get an A/C kit or parts for a clubman?

_________________
Chris

Everything I like is either
illegal, immoral or fattening.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 04, 2004 11:13 pm 
Offline
848cc
848cc

Joined: Tue Mar 16, 2004 6:39 pm
Posts: 383
Location: Gold Coast
No aussie mini's had A/C as standard or optional :-P

I believe some of the Jap Rover mini's did in the 90's but I think you'd probably be hard pressed to find one out here.

I dunno how they would work on a transverse A series... there isn't a whole lotta room for extra pulleys up that end of the motor.

Maybe salvageable from another little asian buzz box built in the 90's... try the mini mania and mini portal threads. There's probably a few seppo's living in the califorian heat who will have fitted A/C

dewey

_________________
dwightgunning.com


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 04, 2004 11:26 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Yer the Late Jap Mini had them...

Wife always said if she won a Million dollars she would do Morris up and put in an Aircon System.

I fyou have a chance have a look in a late model Jap Mini :shock:

_________________
Stop Licking the Dog...I Don't Care Who Started It


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 05, 2004 4:41 am 
Offline
1098cc
1098cc

Joined: Mon Nov 01, 2004 10:19 pm
Posts: 1203
Location: Helensburgh NSW
dewey wrote:
No aussie mini's had A/C as standard or optional :-P

I believe some of the Jap Rover mini's did in the 90's but I think you'd probably be hard pressed to find one out here.


I knew that we didn't do it in Oz but saw that it was done in Japan and wondered if anyone had worked out how to do it here. I wonder if the compressor could be mounted where the air pump on the clubmans was mounted. Anyone got any brackets for an air pump? I don't remember what the setup was with those. It shoudn't be very hard to do now I start thinking about it. I can't recall how the air pump was run, was it off a double water pump pulley?

_________________
Chris

Everything I like is either
illegal, immoral or fattening.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 05, 2004 4:46 am 
Offline
1098cc
1098cc
User avatar

Joined: Sun May 30, 2004 7:12 pm
Posts: 1458
Location: Adelaide
You can get the air-con kit from the UK. It all depends on how fat your wallet is I suppose.

I was looking at this a few months ago and remember seeing a pic of the workings for the air-con system on a rover mini neatly packaged into the rear sub-frame space. Don't know if this was standard install or a cleaver after market use of available space.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 05, 2004 6:57 am 
Offline
848cc
848cc

Joined: Mon Mar 22, 2004 10:46 am
Posts: 327
Location: Sunshine Coast, QLD
WhoDat wrote:
You can get the air-con kit from the UK. It all depends on how fat your wallet is I suppose.

I was looking at this a few months ago and remember seeing a pic of the workings for the air-con system on a rover mini neatly packaged into the rear sub-frame space. Don't know if this was standard install or a cleaver after market use of available space.


do you have any links/pics to that air con system? am interested.

and yeah you can put one under the bonnet if you have room, get one off a jap rover mini. There was one about 6 months a go that went for $1200 the Mini Owners Club of Queensland trader board. I believe ozcooper.com.au had some for sale as well...

_________________
'68 Morris Mini Matic (GF's)- complete!
'68 Morris Mini Deluxe - deciding on specs..
'63 Morris 850 - On the Shelf
Other various mini parts cars :)


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 05, 2004 10:36 am 
Offline
998cc
998cc

Joined: Fri May 07, 2004 8:25 pm
Posts: 597
Location: Sydney
I have one fitted to my car.

Ive seen on one of a mates mini where it is mounted like the raditator on the drivers side wheel arch. mine sits behind the grille which make the engine harder to work with. the altinator has been moved up and the compressor sits underneath the altinator. this makes the spark plug a pane to remove on mine. But boy its nice in the summer nice cool air.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 05, 2004 10:43 am 
Offline
1098cc
1098cc
User avatar

Joined: Sun May 30, 2004 7:12 pm
Posts: 1458
Location: Adelaide
Sorry - I seam to have lost the link.

From memory it was either a pic of a Rover Mini aircon install or one of the after market Kits.

There is a kit available on Mini Mania site - http://www.minimania.com - but it's not cheep


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 05, 2004 12:31 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Jun 08, 2004 1:52 pm
Posts: 4434
Location: Melbourne, VIC.
I have a kit out of a 92-93 Rover ex Japan.

See pics:
(Warning - large pics!)
http://www.geocities.com/b_nicho/TravProj3.htm
I was saving this for my Traveller project, but now Im considering fitting it to my van for a while. I changed the gearbox in the van last weekend, so i relocated the heater hoses to the drivers side of the firewall (via holes in the fresh air blanking plate) and removed the heater core behind the grille in readyiness for the A/C. (I now have a reco Morris 1100 S radiator fitted, so cooling should not be a problem!)

I havent figured out all the brackets or the wiring yet.

Also same system fitted to a car in Jap wrecking yard:
http://www.geocities.com/b_nicho/mini_ac

You could probably replicate something similar.
- Toyota Tercels have a very similar sized condenser, you would just have to make up the brackets.
- Use compact A/C pump from something Japanese - Charade? Mount the a/c pump where the alternator is and mount the alternator where the air pump should go. You will need air pump double pulley, brakets and thermostat housing if not already fitted).
- Under dash evaporator unit can be pulled from any number of 60s-70's luxo barges - check BMW's, Mercs, Fords etc in your local boneyard.
- Use a dryer cannister and hoses off something common.
- Reroute heater hoses so you can use the original hose holes for the A/C hoses.

Hope this helps! 8)

_________________
Brett Nicholson
Greendale (near Ballan) VIC.
1971 Morris Mini Moke
1966 Austin Mini
1965 Morris Mini Traveller
1973 LR Series 3 88
2007 LR Freelander 2


Top
 Profile  
 
 Post subject:
PostPosted: Fri Nov 05, 2004 11:16 pm 
Offline
1098cc
1098cc
User avatar

Joined: Sat Oct 16, 2004 10:59 pm
Posts: 1285
Location: the Cold Toast QLD
my old shcool mate and fellow mini hoon of years gone by, was untill recently the PDI manager of Rover Japan. He was responsible for the aircon project on the mini. Also for the 1300 ERA twin turbo's. Kind of ironic that he now owns an english school. as he left school unable to write.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 06, 2004 10:10 am 
Offline
1360cc
1360cc
User avatar

Joined: Mon Aug 23, 2004 10:07 pm
Posts: 10653
Location: SE Melbourne
Try asking Ozcooper if they have any aircon kits. I know they have Airbag kits for '97 and later minis as replacements, as well as anything else to repair a damaged car.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 06, 2004 10:43 am 
Offline
1098cc
1098cc
User avatar

Joined: Tue Mar 16, 2004 12:36 pm
Posts: 1548
Location: Pakenham VIC
When I used to work at Northern Mini Parts with Henry Draper he had sourced out air con units to fit in a clubby. There was a guy with an LS who wanted to fit one. You should just go to an auto air con place and I am sure they could help you.

You may also be able to buy one from Brickworx SA he used to have spare ones as well. I bought one for mutant but as yet have not installed it.

If there is room in a Rover Spi then you should have plenty of room in a clubby to install one.

_________________
mutant mini 1380cc '73 UK imp-Chroma Lusion-leather interior-8 x 300W Diamond Audio Dual Voice Coil 8" subs, Phoenix Gold 4 chnl amp, Pioneer 7550 DVD, 2x Phoenix Gold A1.800d MonoBlock Amp, Focal Utopia splits, 14" chrome rims 195/40/14 tyres


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 06, 2004 2:44 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Jun 08, 2004 1:52 pm
Posts: 4434
Location: Melbourne, VIC.
If anyone has the wiring diagram for the SPi kit, I would appreciate a copy of it.
There are a couple of wires I have not been able to figure out yet. :?

_________________
Brett Nicholson
Greendale (near Ballan) VIC.
1971 Morris Mini Moke
1966 Austin Mini
1965 Morris Mini Traveller
1973 LR Series 3 88
2007 LR Freelander 2


Top
 Profile  
 
 Post subject:
PostPosted: Sat Nov 06, 2004 2:47 pm 
Offline
1098cc
1098cc

Joined: Mon Nov 01, 2004 10:19 pm
Posts: 1203
Location: Helensburgh NSW
mutant mini wrote:
When I used to work at Northern Mini Parts with Henry Draper he had sourced out air con units to fit in a clubby. There was a guy with an LS who wanted to fit one. You should just go to an auto air con place and I am sure they could help you.


I have been advised to conact the brickworks so will chase that up when he comes back from his honeymoon(??) or was it holidays. I believe he has some half cuts on the water so that maybe the way to go. We are going to use this van for some longish trips so A/C sounds good especially as I am going to paint it black. I am putting a cargo barrier in it so I will put perspex on that to contain the cool air.

_________________
Chris

Everything I like is either
illegal, immoral or fattening.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Nov 11, 2004 9:07 am 
Offline
1275cc
1275cc
User avatar

Joined: Thu Jun 03, 2004 2:56 pm
Posts: 3981
Location: Brisbane
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34201&item=4502582722&rd=1

AUS dollar is pretty good against the US at the moment.

_________________
But he's thriving and striving and hugging the turns.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ]  Go to page 1, 2  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.