I have gotten a pulsar distributor and modified it to fit no worries.
When i hook up the blue wire to -ve and the black with white trace to +ve i get no spark. But if i put both of them on the +ve side it fire no worries.
Is there something wrong here?

It still runs better than the lucas one did.

_________________

OK coil is hooked up with power to + and - to earth
then dizzy blue wire to coil -ve
and dizzy black/white wire to coil +ve

_________________
Too many cars, and too little time.

ah HA! all good now thanks awdmoke

_________________

Got mine around the wrong way before too
It's called "learning from your mistakes"

_________________
Too many cars, and too little time.

I just can't help but to ask this but are you just an old learer from way back awdmoke??????

Just learned that Smokie is still an old smart arse!

_________________
Too many cars, and too little time.

You forgot to say old smart arse Mike...

I have another problem now it starts cutting out after 1min at 100km/h
if you let it idle for a while all is good again.
You can putt around with no problems,it's just at 100km/h or there abouts

<edit> all sorted now twas a earthing issue it was.

_________________

what differences does the pulsar dizzy make cause thinking of changing mine soon

_________________

Reliability

+ you get a better "fatter" spark, and never have to change a set of points again

_________________
Too many cars, and too little time.

Less timing scatter more accurate,
it's not Lucas(Oh you said reliability )

_________________
---
Roads need more corners
A Deluxe(CG13DE), 2 Clubbies(998 and 1275) and 2 Morris 1100Ss