Hello everyone,
I have a little 66 Deluxe that has that little green flashing light for the indicators. First thing, what are my chances of finding a replacement? I bumped the damned thing and busted it.
If my chances of finding one are buckley's.... what can i stick back in its place?
Thoughts and ideas would be great. I also want to keep it as close to stock as possible, so removing the indicator stalk and replacing it with a K one or something is something i would prefer not to change.

Cheers,
Damien

Not buckleys, here you go:

http://cgi.ebay.com.au/Mini-indicator-Lense-Globe-goes-on-stalk-NEW_W0QQitemZ4605295242QQcategoryZ32072QQcmdZViewItem

_________________
---
Roads need more corners
A Deluxe(CG13DE), 2 Clubbies(998 and 1275) and 2 Morris 1100Ss

Great! Never thought to try Ebay and I am there regularly.
OK so i have the cover and the globe, what about the base. And how does it come off. i tried to screw it off but feels pretty solid. I have a feeling the previous owner may have glued it. To be honest i hate the thing, but its funny how i actually depend on it considering the noise of the car hides the ticking of the flasher can.

Anyways, thanks for that link. Thats certainly a start!

Regards,
Damien

are you sure it isnt soldered cause it may be soldered to the point and will be tough to get off!

_________________
00' Forester GT

The base was soldered yes, but because it has broken clean off the centre came out leaving me with a little bit of plastic left on what looks like a peened surface.
worse case scenario i'll but the stalk if anyone has one.

yeh mine was like glued/ joined to the stalk, and i accidentaly did break it whoops

_________________
-jamie-
1963morris 850
1965 solid side van
1994 rover racecar

http://www.minispares.com/Product.aspx?pid=33786

Why Pay Big Bucks for a snd hand one when you can get a new one landed for less than $160

Cheers

Aaron

_________________