This is for the brake servo fitted to the Australian assembled Mark 1 and some early MK II Cooper S.
The bore size for these is 5/8" diameter (no identifying grooves in the end of the slave cylinder body).
Click on a page image to enlarge it.
Attachment:
Lockheed Servo Service Manual front cover.jpg
Attachment:
Lockheed Servo Service Manual frontspiece contents.jpg
Attachment:
Lockheed Servo Service Manual p01.jpg
Attachment:
Lockheed Servo Service Manual p03.jpg
Attachment:
Lockheed Servo Service Manual p04.jpg
Attachment:
Lockheed Servo Service Manual p05.jpg
Attachment:
Lockheed Servo Service Manual p06.jpg
Attachment:
Lockheed Servo Service Manual p07.jpg
Attachment:
Lockheed Servo Service Manual p08.jpg
Attachment:
Lockheed Servo Service Manual p09.jpg
Attachment:
Lockheed Servo Service Manual p10.jpg
Attachment:
Lockheed Servo Service Manual p11.jpg
Attachment:
Lockheed Servo Service Manual p12.jpg
Attachment:
Lockheed Servo Service Manual p13.jpg
Attachment:
Lockheed Servo Service Manual rear cover.jpg
