ausmini
https://ausmini.com/forums/

4EFTE engine and subframe for sale
https://ausmini.com/forums/viewtopic.php?f=23&t=67521		 Page 1 of 1
Author:  riddo [ Tue Dec 07, 2010 12:18 pm ]
Post subject:  4EFTE engine and subframe for sale
I have for sale my subframe and 4FETE engine / box that was going to be used for a conversion. I have decided that I want to keep one mini original and have one of each - two turbo mini's is greedy the wife says!!
Anyway, the subframe was built by Tricky in Brisbane, and all I have done is fit the engine to it, have all the parts for the engine - ECU, wiring, turbo etc, engine was purchased from the Toy Shop at Newcastle and sold with about 90000kms on the front cut.
Will also supply the remainder of the front cut for all the odds and ends.
This has cost me a small fortune already, and I don't want to blow any more.
Open to offers over $4000 for the conversion.

I also have a spare 4EFTE engine, 5 speed box and auto box extra, also have the original starlet brakes etc. Call to discuss price on these items.

Mike 0418256007.
Author:  Fat Boy Dave [ Tue Dec 07, 2010 1:26 pm ]
Post subject: 
What's your location?
Author:  Harley [ Tue Dec 07, 2010 1:36 pm ]
Post subject: 
Yep, location would help, i know I could be interested if you're local.
:D
Author:  riddo [ Tue Dec 07, 2010 6:52 pm ]
Post subject: 
sorry, I'm in Bathurst NSW. Happy to help with freight.
Author:  _666_ [ Thu Dec 09, 2010 5:03 pm ]
Post subject: 
is this subframe designed for a roundnose or clubman,

do you have any pics of it ?
Author:  riddo [ Thu Dec 09, 2010 6:48 pm ]
Post subject: 
was ordered for a clubman, but it has removable front brace so I believe that it will squeeze into a round nose as well. Archangel would be the best person to ask as he built it.
Send me your email address and I will send you some pics.
Author:  JC [ Fri Dec 17, 2010 9:11 am ]
Post subject: 
Interested to see if this sells. I couldn't sell mine wrapped in a car for $5k.
Author:  hallsey [ Fri Dec 17, 2010 10:14 am ]
Post subject: 
Geeeezzz if i had the 5k iwould have bought yours in a flash JC
(without telling the minister for finance of course)

cheers Hallsey
Author:  blue_deluxe [ Fri Dec 17, 2010 11:58 am ]
Post subject: 
Damn i couldve had yours for 5 JC, 7 was pushing it a bit for me. And i think ive spent at least double that and not got anywhere near finishing.
Author:  riddo [ Fri Dec 17, 2010 4:10 pm ]
Post subject: 
Well its only going to sit in the shed now with a tarp over it if it doesn't sell, got too much else on to keep throwing money at it!
Author:  blue_deluxe [ Fri Dec 17, 2010 7:20 pm ]
Post subject: 
riddo wrote:
Well its only going to sit in the shed now with a tarp over it if it doesn't sell, got too much else on to keep throwing money at it!


Its doing the same as mine then lol.
Author:  tscott [ Thu Mar 03, 2011 1:23 pm ]
Post subject: 
I'm in Bathurst too, I want to do that conversion at some point, but the young ones are sucking up a little too much of the disposable income. :(

We should hook up at some point for a yarn

Who where you going to use for engineering ? From my reading it looks like the nearest are Blacktown and Dubbo.
Author:  tasmini [ Sun Mar 06, 2011 6:00 pm ]
Post subject: 
Hey have you got any pics?
Author:  mini3101 [ Wed May 18, 2011 9:29 pm ]
Post subject:  Mini subframe with motor
Hey just wondering if you engine and subframe is still available?
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/