| ausmini https://ausmini.com/forums/ |
|
| Auto and Manual 4efte difference https://ausmini.com/forums/viewtopic.php?f=23&t=62857 |
Page 1 of 1 |
| Author: | blue_deluxe [ Mon May 03, 2010 4:51 pm ] |
| Post subject: | Auto and Manual 4efte difference |
Has anyone else used an auto engine as a base for their conversion? Just putting my observations of parts that are different when swapping a manual box onto an auto engine. I used a 6 speed manual on mine, but its the same case as a 5 speed. -The two top gearbox mounting bolts need to be swapped to longer bolts as the manual bell housing is thicker. 
-The rear gearbox mount is a different thickness, like in the picture below. 
|
|
| Author: | JC [ Mon May 03, 2010 5:07 pm ] |
| Post subject: | |
Isn't the auto box significantly larger around the driveshaft opening (in the subframe) and thus an auto is not an option in a mini? |
|
| Author: | Mini Mad [ Mon May 03, 2010 5:14 pm ] |
| Post subject: | |
I went the other way around and put a Manual 'box on an Auto engine..it just bolted straight up for me with no problems. |
|
| Author: | blue_deluxe [ Mon May 03, 2010 5:28 pm ] |
| Post subject: | |
JC wrote: Isn't the auto box significantly larger around the driveshaft opening (in the subframe) and thus an auto is not an option in a mini?
Yeah, i got an auto car and took the block off that. Still got the auto in the shed. Bloody big lump of metal it is. |
|
| Author: | blue_deluxe [ Fri Sep 24, 2010 7:54 pm ] |
| Post subject: | |
Few more findings on this, Does the auto have a diffferent starter motor mounting than a manual? The auto one i pulled off had a bolt that went through the bellhousing and into a thread on the starter motor, and the other bolt went through the starter and into a thread on the bellhousing. Ive swapped to a 6 speed manual, but theres no thread to bolt the starter motor onto. Anyone had this happen? |
|
| Author: | Mearcat [ Mon Sep 27, 2010 11:13 pm ] |
| Post subject: | |
blue_deluxe wrote: ...Does the auto have a diffferent starter motor mounting than a manual? ...
Must be - My (manual 'box) starter motor has two bolts that mount the starter motor to the bell housing, and they are both through the starter and into threads on the bell housing. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|