Here's Mine
| ausmini https://ausmini.com/forums/ |
|
| 4EFTE Gearbox Selector Modification https://ausmini.com/forums/viewtopic.php?f=23&t=49606 |
Page 1 of 1 |
| Author: | veedubzz [ Mon Jan 26, 2009 7:00 pm ] |
| Post subject: | 4EFTE Gearbox Selector Modification |
Hi Guys My gear selector is touching the subframe. Does anyone have pics of how to modify the selector to clear the rear frame. I have seen sumwhere that it can be bent upwards. Has anyone done this? Thanks |
|
| Author: | 92 [ Mon Jan 26, 2009 8:20 pm ] |
| Post subject: | |
Here's Mine
|
|
| Author: | veedubzz [ Mon Jan 26, 2009 10:53 pm ] |
| Post subject: | |
Thanks 92 |
|
| Author: | JC [ Tue Jan 27, 2009 9:05 am ] |
| Post subject: | |
Whilst Ben's looks awesome, its worth noting that more often than not people have just put a pocket in the subframe and not modified that part odf the selector. |
|
| Author: | slinkey inc [ Tue Jan 27, 2009 11:00 am ] |
| Post subject: | |
This is what Ben made for me. The suspension tower has been modified for it to fit. Although it looks difficult the rubber cone still fits rather easily. I don't have any pictures of the cables attached, but last time the engine was in I tested the selector out and it all works. 
And Ben, I put the handbrake lever in and it clears the gearshift, it's close but clears, hopefully it'll all be good, otherwise I'll move it all forward later. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|