ausmini https://ausmini.com/forums/ |
|
You guy's know your all insane? https://ausmini.com/forums/viewtopic.php?f=23&t=34239 |
Page 1 of 1 |
Author: | mini74clubman [ Fri Jul 27, 2007 12:50 pm ] |
Post subject: | You guy's know your all insane? |
how far will this go? |
Author: | minstar [ Fri Jul 27, 2007 1:11 pm ] |
Post subject: | |
Till someone loses an eye ![]() |
Author: | Archangel007 [ Fri Jul 27, 2007 4:17 pm ] |
Post subject: | |
Or a b-grade actor becomes President of the USA (again!!) |
Author: | goffy [ Fri Jul 27, 2007 5:52 pm ] |
Post subject: | |
when someone straps jet engines on each side ![]() |
Author: | Archangel007 [ Fri Jul 27, 2007 6:46 pm ] |
Post subject: | |
"batteries to power, turbines to speed...................." And dont forget to charge the flux capacitor! |
Author: | Kennomini [ Fri Jul 27, 2007 7:56 pm ] |
Post subject: | |
"F#@k going slow just go go go" ![]() any one thought of putting an all wheel drive V8 in one yet ![]() |
Author: | Archangel007 [ Fri Jul 27, 2007 9:04 pm ] |
Post subject: | |
Kenno, When someone comes up with a 2.0 litre V8 I will have a crack. Until then, its the standard fare! |
Author: | goffy [ Sat Jul 28, 2007 2:29 am ] |
Post subject: | |
the v8 is already my next project. definately wont be road legal though |
Author: | GtNige [ Sat Jul 28, 2007 5:05 am ] |
Post subject: | |
There is a guy over here who has put Scooby Impretza running gear in a pick-up |
Author: | simon k [ Sat Jul 28, 2007 9:02 pm ] |
Post subject: | |
GtNige wrote: There is a guy over here who has put Scooby Impretza running gear in a pick-up
how much did he have to lengthen the front? there's a guy here who has one in a Moke... and apparently one in NZ too and yes, we know we're insane - what's your point? |
Author: | GtNige [ Sun Jul 29, 2007 5:43 am ] |
Post subject: | |
Not been lengthened at all. Its a fully spaceframed Jobbie built for Hill Climbs / Sprints |
Author: | simon k [ Sun Jul 29, 2007 6:30 pm ] |
Post subject: | |
GtNige wrote: Not been lengthened at all.
Its a fully spaceframed Jobbie built for Hill Climbs / Sprints bizarre - the front driveshafts must come forward at nearly 45 degrees! any photos on the 'net? |
Author: | Dylans Clubby [ Sun Jul 29, 2007 11:44 pm ] |
Post subject: | |
motor in the back maybe??? ive seen that done before. i think... |
Author: | GtNige [ Tue Jul 31, 2007 5:18 am ] |
Post subject: | |
I will take some pics at the next event. I know he had to shorten the rear prop / transaxle alot Nige |
Author: | simon k [ Sat Aug 04, 2007 9:50 pm ] |
Post subject: | |
GtNige wrote: I will take some pics at the next event.
I know he had to shorten the rear prop / transaxle alot Nige I'd say the diff is bolted directly to the back of the gearbox! |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |