ausmini
https://ausmini.com/forums/

For sale - 4EFTE powered Morris Mini Minor
https://ausmini.com/forums/viewtopic.php?f=23&t=32859		 Page 1 of 2
Author:  JC [ Thu Jun 14, 2007 2:25 pm ]
Post subject:  For sale - 4EFTE powered Morris Mini Minor
http://www.ausmini.com/forums/viewtopic.php?t=32850

Given there is no room for questioning in the for sale section I thought I might start a thread in here to save having to answer the same questions again and again.

I want to give a hayabusa powered car a go. To fund the purchase of that I need to sell either the car as a whole or the motor/subframe combination. My preference would be to sell the subframe and motor and associated stuff as a package.

Not getting out of the game by any means, just want to do something a little more adventurous.
Author:  slinkey inc [ Thu Jun 14, 2007 6:18 pm ]
Post subject: 
A PM was sent. :wink:
Author:  JC [ Fri Jun 15, 2007 8:08 am ]
Post subject: 
Been asked quite a bit now:

$5k for Frame and motor combo:

That'll include frame (no brakes or suspension), motor/box/toyota driveshafts, 2 turbos, exhaust, new clutch, intercooler, wiring loom/instrument cluster, new cam belt and anything else I have there that you will need to get it running.

All you will need then is to get it in your car, fuel it (i'll give you a bent up fuel line) and have some driveshafts made ($500 ish).
Author:  JC [ Fri Jun 15, 2007 4:15 pm ]
Post subject: 
Motor has about roughly 100,000k's on it.

Does include new cam belt.

As a whole I would be looking for about $15k.
Author:  slinkey inc [ Fri Jun 15, 2007 4:45 pm ]
Post subject: 
I'll be honest, a little bit more than I want really. Not after 150hp atws, after about 100. So yeah, a little bit more than I wanted to pay for an engine and subframe.

Thanks for the reply though!
Author:  minimetoy [ Fri Jun 15, 2007 9:01 pm ]
Post subject: 
If you keep the stock cT9 on it then you will only get the 100hp at the wheels :wink:
Author:  Archangel007 [ Fri Jun 15, 2007 9:41 pm ]
Post subject: 
Having spent a fair bit of time on this car myself, I would consider the price asked a bargain......

Better yet, buy the whole care and be 9/10th's of the way to a 4EFTE powered Mini that has a rust free, ground-up rebuilt sheel that has virtually new paint.

Cheers,
Tricky
Author:  Checkmate [ Fri Jun 15, 2007 9:54 pm ]
Post subject: 
I would love to buy this but even if you had done 99% of the work for me I don't think I would even know where to start!!!

I have read so many different websites and posts in this forum about doing these conversions but I judt don't thnk I would be capable of doing it by myself.

I can weld and am pretty handy but I still think this seems pretty advanced.

How do all the people that are doing these conversions know what they are doing?
Author:  slinkey inc [ Fri Jun 15, 2007 9:57 pm ]
Post subject: 
I believe it's worth it to some one else, not me, I reckon I can get away cheaper on ther motor an subframe. By pulling in some favours. :wink:
Author:  NoMoreMinis [ Fri Jun 15, 2007 10:32 pm ]
Post subject: 
minimetoy wrote:
If you keep the stock cT9 on it then you will only get the 100hp at the wheels :wink:


There are 3 4efte's in Adelaide with the CT9 and only a few bolt on mods running around 150hp at the wheels ;)
Author:  13secmini [ Sat Jun 16, 2007 9:19 am ]
Post subject: 
NoMoreMinis wrote:
minimetoy wrote:
If you keep the stock cT9 on it then you will only get the 100hp at the wheels :wink:


There are 3 4efte's in Adelaide with the CT9 and only a few bolt on mods running around 150hp at the wheels ;)


dont think there standard ct9's hehe.
Author:  JC [ Sat Jun 16, 2007 4:44 pm ]
Post subject: 
13secmini wrote:
NoMoreMinis wrote:
minimetoy wrote:
If you keep the stock cT9 on it then you will only get the 100hp at the wheels :wink:


There are 3 4efte's in Adelaide with the CT9 and only a few bolt on mods running around 150hp at the wheels ;)


dont think there standard ct9's hehe.


Bog stock ct9's. Front Mount cooler, SAFC, exhaust and a HKS actuator = 150hp atw.
Author:  mattywood [ Sun Jun 17, 2007 11:32 am ]
Post subject: 
Can you post some pics?
Author:  Archangel007 [ Sun Jun 17, 2007 11:48 am ]
Post subject: 
Hi Matty,

These were taken during the conversion.

JC has more recent pics but these should geive you a general idea of the quality of the car.

Image

Image

Cheers,
Tricky
Author:  JC [ Sun Jun 17, 2007 5:42 pm ]
Post subject: 
Thanks Tricky,
Image

Quite a few more here:

http://s91.photobucket.com/albums/k302/ ... C/?start=0
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/