I think my trike was a little more tidy.
| ausmini https://ausmini.com/forums/ |
|
| Mini Engine in Trike https://ausmini.com/forums/viewtopic.php?f=23&t=31333 |
Page 1 of 1 |
| Author: | miniboy1962 [ Wed May 02, 2007 11:11 am ] |
| Post subject: | Mini Engine in Trike |
Using the mini engine for something a bit different... http://cgi.ebay.co.uk/Metro-Trike_W0QQi ... dZViewItem |
|
| Author: | poeee [ Wed May 02, 2007 12:46 pm ] |
| Post subject: | |
Hehe looks like fun! |
|
| Author: | Archangel007 [ Wed May 02, 2007 3:45 pm ] |
| Post subject: | |
I ike his description on the amount of power "lots" |
|
| Author: | clubmn [ Wed May 02, 2007 7:19 pm ] |
| Post subject: | mm1275 |
I think my trike was a little more tidy.
|
|
| Author: | Archangel007 [ Thu May 03, 2007 6:33 am ] |
| Post subject: | |
Where's the clutch, where's the brake??? |
|
| Author: | goffy [ Thu May 03, 2007 12:34 pm ] |
| Post subject: | |
to break you aim for something soft or have loads of rubber on your shoes 
does look damn cool though clubmn |
|
| Author: | clubmn [ Thu May 03, 2007 1:34 pm ] |
| Post subject: | mm1275 |
clutch is left foot brake is right foot. The brakes were great, clutch took a bit to get use 2 sorta on or off, wasnt much travel. Dangerious fun |
|
| Author: | sports850 [ Fri May 04, 2007 7:11 am ] |
| Post subject: | |
Not bad clubmn , does it still extist or has it been chopped for parts ? I tried something similar years ago but didn't get as far as yours , mine had a lot lower seat (drivers head at rocker cover height) and chopper style foot pegs way out the front . The gearshift was the problem as there was no way to reach over the motor for a long lever like your's , a linkage like the fang has could be interesting though .... |
|
| Author: | 1018cc [ Fri May 04, 2007 11:10 am ] |
| Post subject: | |
Don't like those maltese cross tail lights - how very american of him. |
|
| Author: | clubmn [ Fri May 04, 2007 12:26 pm ] |
| Post subject: | mm1275 |
Chopped it up after I realized it was a little 2 dangerous as a bike, all the weight was at the back and u morealess had to sit on the fuel tank to keep the thing down. The gear linkeges were actually made and the shifter was just under the tank before we dismantled it. If it was auto it would have been better. Anyway the setup went fantastic when it was fitted to a buggy |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|