hey guys im wanting to do a honda city turbo converison
im in nz and i got a clubman but will be geting engine soon hopefully and just wanted some advice on how to do this???
| ausmini https://ausmini.com/forums/ |
|
| honda city turbo help?? https://ausmini.com/forums/viewtopic.php?f=23&t=29086 |
Page 1 of 2 |
| Author: | mini power [ Sun Mar 11, 2007 3:42 pm ] |
| Post subject: | honda city turbo help?? |
hey guys im wanting to do a honda city turbo converison im in nz and i got a clubman but will be geting engine soon hopefully and just wanted some advice on how to do this???
|
|
| Author: | HPDesign [ Sun Mar 11, 2007 4:41 pm ] |
| Post subject: | |
my best advice is to save some money for some decent vented brakes, you don't want your project not to stop, and try and get all you need from the motor and a bit more i.e. some wiring. if the shell isn't that good then get to work on that. Make sure theirs not much rust in it and clean it all up a little. I am not sure on engineering in NZ, but I think it's similar to AUS, talk to an engineer. and I remember not all that long ago their was a nice blue one put together in NZ, have a look through the pages on here it was impressive. Good luck and look forward to seeing some pic's of the progress |
|
| Author: | simon k [ Sun Mar 11, 2007 5:30 pm ] |
| Post subject: | |
this one! http://www.ausmini.com/forums/viewtopic ... ty&start=0 really neat job too - since the honda city brakes aren't vented, you shouldn't need vented brakes - just use the honda ones |
|
| Author: | glenno [ Mon Mar 12, 2007 4:56 am ] |
| Post subject: | |
Where you at in NZ mate? Check out member "mymini" and his build-did a very nice conversion. Obviously it will need certifying so approach a certifyer and get some guidelines before you start the build. oh and more advice would be to get good brakes-look on trademe for some Metro vented setups.....steer clear of aussies pushin' dodgy converted drum brakes....lol Cheers Glenno (awaiting the uproar) |
|
| Author: | mini power [ Mon Mar 12, 2007 5:31 am ] |
| Post subject: | |
yeah im geting some mg metro brakes from up north. im in chch a know that the blue one is in chch but i dont know the guys full name so im a bit suck trying to find him does any body know his full name?? or a number?? i should be geting the mini some time this week so ill put up some pics of it. thanks jack |
|
| Author: | glenno [ Mon Mar 12, 2007 5:41 am ] |
| Post subject: | |
Good stuff Jack-another southern conversion-we'll all need a meet up sometime........ Welcome to the forum Glenno |
|
| Author: | mini power [ Mon Mar 12, 2007 12:36 pm ] |
| Post subject: | |
thanks,yea why not, what sort of mini do you have?? |
|
| Author: | mini power [ Mon Mar 12, 2007 5:16 pm ] |
| Post subject: | |
hey i just wana know how hard this engine conversion is gana be? and how much this is gana cost be im waiting to be as cheap as my boss is a weader so that helps or does it can some one give me a good figer |
|
| Author: | glenno [ Tue Mar 13, 2007 5:05 am ] |
| Post subject: | |
How long is a piece of string? Your question gets asked alot-there are no easy answers, it comes down to a host of factors....but like you've alluded to-having skilled people around you that you can lean on for some help or advice goes along way doing these conversions. I opted for the Vtec-1600cc.....did everything myself-except for exterior paint-made the subframe, drive shafts, everything-and I think I could burn about $8000 in machining easily-but I wanted everything done right and when your machining stuff for yourself you take extra care and alittle longer on the finishes. What skills do you have? Trust me-if you're committed to this conversion you will know more when you've finished-much more......When it came to wiring the car I was quotted upwards of $1000, too expensive for me-so I looked around-did some reading and asked some questions-found a schematic for my engine on the interweb and went for it-was a very happy day when I turned the key and she roared into life........ Search and take the time to read this and other fourms-almost all the answers to all your questions are here........and be paitent......and ask sensible questions....... Regards Glenno |
|
| Author: | mini power [ Tue Mar 13, 2007 3:13 pm ] |
| Post subject: | |
im not wanting to spend a lot af money as im still at school but i know a fear about minis this will be my 3rd im not gana paint her i like the colour already but my max buget would me about 2-3 grand (not enclucding the honda or the mini nor the wheels)i can get all the welding for free and the engine ill do my self,im geting her on saturday or sunday  heres some pic of her. wait this ant working?? help.
|
|
| Author: | Archangel007 [ Tue Mar 13, 2007 8:07 pm ] |
| Post subject: | |
Mini power - end the pics to me and I will post them for you.... |
|
| Author: | mini power [ Thu Mar 15, 2007 12:31 pm ] |
| Post subject: | |
yeah thanks that would be grate whats your email?? |
|
| Author: | Archangel007 [ Thu Mar 15, 2007 1:40 pm ] |
| Post subject: | |
PM sent |
|
| Author: | Archangel007 [ Thu Mar 15, 2007 8:33 pm ] |
| Post subject: | |
Pics of Johns car........ 
Enjoy! Cheers, Tricky |
|
| Author: | mini power [ Fri Mar 16, 2007 5:15 am ] |
| Post subject: | |
thanks for do that for me and its jack not john |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|