Found this
and found it very useful, there is so many pint sized motors from all jap car companys just waiting to be thrown in a mini 
http://www.aussieveedubbers.com/forums/viewtopic.php?tid=18046
my pick of the bunch would be the K6a suzuki
| ausmini https://ausmini.com/forums/ |
|
| Pick your Engine swap https://ausmini.com/forums/viewtopic.php?f=23&t=23359 |
Page 1 of 1 |
| Author: | gzeVan [ Sat Oct 07, 2006 6:02 pm ] |
| Post subject: | Pick your Engine swap |
Found this and found it very useful, there is so many pint sized motors from all jap car companys just waiting to be thrown in a mini
http://www.aussieveedubbers.com/forums/viewtopic.php?tid=18046 my pick of the bunch would be the K6a suzuki |
|
| Author: | 13secmini [ Sat Oct 07, 2006 6:30 pm ] |
| Post subject: | |
If these new rules come in next year restricting conversions with a 20% power increase over stock motor i will be looking at the mitsubishi 4A30T. Its 660cc stock 47kw, 4 cylinder DOHC 20 Valve, Turbo, Intercooled, efi, 4wd, 5 speed. But dont tell anyone 
Oh and anyone thinking its just a 660cc motor why bother, well how does 12000rpm redline stock and cars in japan with over 130hp@wheels with unopened engines. |
|
| Author: | gzeVan [ Sat Oct 07, 2006 8:24 pm ] |
| Post subject: | |
they have funny names for that donor car over there "Town Box" & "Pajero Mini" 20v  imagine the size of those valves
I think with that size motor you could fit a good size radiator at the front (round nose)and still have penty of options for the intercooler and all under 600kgs yours would be an awsome conversion with awd This is a pic of the one im planning on next year into an 850 
|
|
| Author: | 1360 LS [ Sun Oct 08, 2006 8:44 am ] |
| Post subject: | |
that is the best little performer I've seen in a while ... I'd love to gvet more stats and pic though.. anyone? I tried google but nothing much came up. Can anyone show me where to find the stats or more pics? |
|
| Author: | coolfx [ Wed Oct 11, 2006 8:16 pm ] |
| Post subject: | |
but will the 4A30T fit into a mini? mitsy motor is 4WD? |
|
| Author: | 13secmini [ Wed Oct 11, 2006 8:22 pm ] |
| Post subject: | |
coolfx wrote: but will the 4A30T fit into a mini? mitsy motor is 4WD?
Only one way to know, give it a try hehe,,,,, (thats what i did with the 4efte) i will be getting measurments on one in the next few days, but by looking at photos i think it will be fine in a round nose without cutting inner wings, the inlet mani is in a great position too. Yes the 4a30t comes in 4wd and 2wd, im still waiting on pics of the 4wd box to see the size. |
|
| Author: | coolfx [ Wed Oct 11, 2006 8:28 pm ] |
| Post subject: | |
so is that going to be your replacement for the 13sec min you just sold???????
|
|
| Author: | gzeVan [ Wed Oct 11, 2006 8:35 pm ] |
| Post subject: | |
hey brad ive being doing some research and found that the IHI RBH4 turbo is one of the best upgrades, with a better intercoloor and manifold, saw an f6a put 74kw at the wheels on 1.2 bar using a unichip Im sure this would adapt to most motors this size, boost hit at 4000 and went all the way to 9000 rpm
|
|
| Author: | 13secmini [ Wed Oct 11, 2006 9:00 pm ] |
| Post subject: | |
yeh the IHI RBH4 is a great little turbo, very similar in specs to the garrett gt17. Fast spool on them and hold 15psi and higher all the way to redline. f6A is a great little motor, i have personally seen 80kw@wheels out of one, around 130hp@crank, not bad for a 660cc motor. My replacment project has a few guide lines engine wise, first it is going to be in a round nose shell, no engine bay mods at all, has to have turbo, 5 speed manual, fit in a 4wd gearbox without moving steering column, rear diff compact, and also look good in the bay
If these guidlines dont come in for 20% power increase, i will be going either a suzuki K10A turbo, or daihatsu K3-Ve, K3-ve2, K3-vet both 4wd. If the power increase limit comes in we are stuck with a factory motor with less then 65hp going of the factory specs on a 1098cc mini. Then i will be looking at the mitsubushi 4a30t, suzuki k6a, daihatsu JB-det, subaru EN07 supercharged, all 4wd boosted motors with 64hp stock and all can make twice that power unopened. |
|
| Author: | thomen [ Thu Oct 12, 2006 9:25 am ] |
| Post subject: | |
what about the F6A DOHC Turbo 47.7kw 657cc 3cyl would the CB 100 DOHC Turbo 78kw 993cc 3cyl pass the new laws? the f6a is running in a mighty boy a friend of mine has and their engine bay would be smaller than a roundies (just on looks) |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|