oopps yeh i shoulda put this in the A series section, can someone ploease move it
| ausmini https://ausmini.com/forums/ |
|
| Modded A series Engine https://ausmini.com/forums/viewtopic.php?f=23&t=22985 |
Page 1 of 2 |
| Author: | sonsta [ Wed Sep 27, 2006 9:00 am ] |
| Post subject: | Modded A series Engine |
Soo i got over the busa mini idea, it was gonna cost way way to much and i worked out i could spend money more wisely, soo i thought of buyin a pre modified A series engine, now my questions is this...... I found a web site a while ago that sold pre modified mini engine and tons of other performance parts for minis, im pretty sure it was a US company but i cant bee 100% on that, does anyone know of this site? if so could u please post up a link to it or any other company like this |
|
| Author: | simon k [ Wed Sep 27, 2006 9:08 am ] |
| Post subject: | |
you should put this thread in the A series mods forum.... and there are oodles of places that will modify you an engine in Australia, easier, cheaper and safer than importing one, but if you don't have a mini already, just buy one that is close to what you want - works out much cheaper than building one and someone has already done the hard work... |
|
| Author: | sonsta [ Wed Sep 27, 2006 9:22 am ] |
| Post subject: | |
oopps yeh i shoulda put this in the A series section, can someone ploease move it
|
|
| Author: | cush [ Wed Sep 27, 2006 9:43 am ] |
| Post subject: | |
sorry, i can't |
|
| Author: | minimetoy [ Wed Sep 27, 2006 10:00 am ] |
| Post subject: | |
Come on you must be kidding. Do a Gti or efte conversion, you know you want to. Going from a bike engine back to a A-series ??? Dan |
|
| Author: | simon k [ Wed Sep 27, 2006 10:24 am ] |
| Post subject: | |
minimetoy wrote: Come on you must be kidding.
Do a Gti or efte conversion, you know you want to. Going from a bike engine back to a A-series ??? Dan the swift is still sitting at the end of my street.... much cheaper than a modded A series, except for the cost of the conversion that is... |
|
| Author: | sonsta [ Wed Sep 27, 2006 11:29 am ] |
| Post subject: | |
well this website i had supercharged injected 170hp A series engines for around th $8000 mark, it would cost more than that to put a vtec or swift engine in wouldnt it |
|
| Author: | STABBA [ Wed Sep 27, 2006 11:51 am ] |
| Post subject: | |
about ten grand but round same power efte and reliable stock toyota much better |
|
| Author: | Mini Mad [ Wed Sep 27, 2006 11:53 am ] |
| Post subject: | |
sonsta wrote: well this website i had supercharged injected 170hp A series engines for around th $8000 mark, it would cost more than that to put a vtec or swift engine in wouldnt it
170HP Crank...so ~145-50 at the wheels vs 4EFTE with minimal mods 200atw.. A Series at that power figure (and imho that's a BS power quote - not true power) would only last you 12months. |
|
| Author: | DRB33N [ Wed Sep 27, 2006 11:55 am ] |
| Post subject: | |
sonsta wrote: well this website i had supercharged injected 170hp A series engines for around th $8000 mark, it would cost more than that to put a vtec or swift engine in wouldnt it
170HP will break you gearbox or diff in a mini A series |
|
| Author: | Mini Mad [ Wed Sep 27, 2006 11:57 am ] |
| Post subject: | |
Boostedmini runs a 180HP Turbo A-series on a standard mini K box with no problems  uprated diff though..
|
|
| Author: | JC [ Wed Sep 27, 2006 12:01 pm ] |
| Post subject: | |
sonsta wrote: well this website i had supercharged injected 170hp A series engines for around th $8000 mark, it would cost more than that to put a vtec or swift engine in wouldnt it
$8k US. |
|
| Author: | Mini Mad [ Wed Sep 27, 2006 12:01 pm ] |
| Post subject: | |
Plus Shipping. |
|
| Author: | willy [ Wed Sep 27, 2006 12:02 pm ] |
| Post subject: | |
Plus taxes. |
|
| Author: | sonsta [ Wed Sep 27, 2006 12:49 pm ] |
| Post subject: | |
hmm is there any cheap way to get power  lol
|
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|