they were in miniworld recently....
they can do a longitudinal front mount rwd clubby...
| ausmini https://ausmini.com/forums/ |
|
| VTEC https://ausmini.com/forums/viewtopic.php?f=23&t=17688 |
Page 1 of 1 |
| Author: | monda [ Wed Mar 29, 2006 5:43 pm ] |
| Post subject: | VTEC |
Does anyone know of the Allspeed subframe from the UK you can buy for VTEC conversions?, you dont need to extend the nose! Also Brian Campbell (US) has made one, does anyone know of this subframe, once again you dont have to extend the nose? cheers |
|
| Author: | cush [ Wed Mar 29, 2006 6:28 pm ] |
| Post subject: | |
they were in miniworld recently.... they can do a longitudinal front mount rwd clubby...
|
|
| Author: | miniza [ Wed Mar 29, 2006 6:29 pm ] |
| Post subject: | |
i have my half cut already, and i'm about to order an allspeed kit from the uk, brian campbells frames are for LHD only, the diff of the gearbox hits the pinion of the RHD steering rack |
|
| Author: | Vtec mini [ Wed Mar 29, 2006 6:45 pm ] |
| Post subject: | |
I have a vtec cradle made by Brian Campbell, and it is in my right hand drive clubman. Moving the steering is no biggie. |
|
| Author: | feralsprint [ Wed Mar 29, 2006 6:52 pm ] |
| Post subject: | |
Vtec mini wrote: I have a vtec cradle made by Brian Campbell, and it is in my right hand drive clubman.
Moving the steering is no biggie. Tell me that when its finished and you have gotten rid of the bump steer 
|
|
| Author: | Vtec mini [ Thu Mar 30, 2006 3:24 pm ] |
| Post subject: | |
If there is some bump steer, I will look at it when the mini is on the road. I hope to be smilling form ear to ear so one more thing to do won't be a biggie. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|