ausmini https://ausmini.com/forums/ |
|
GTi turbo clubman new pics 6/3/06 https://ausmini.com/forums/viewtopic.php?f=23&t=11809 |
Page 1 of 6 |
Author: | 998_Clubman [ Tue Oct 04, 2005 6:40 pm ] |
Post subject: | GTi turbo clubman new pics 6/3/06 |
hey the car has been off the road for about 9 weeks now, due to the loose crank bolt, new crank, vitara pistons and a little bit of head work, just waiting on the front brace for the subframe, i had to cut part of it out, which only goes between the front bolts for the subby, the new brace is going to be left over role cage pipe which will be bolted to the subframe which will make it easier in future.. but the turbo and manifold is finished, engine is ready to go in, finished cutting and mounting the intercooler and the right angles bends, (see pics) ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Author: | BLACKRZ_667 [ Tue Oct 04, 2005 7:10 pm ] |
Post subject: | |
WoW That looks great, i like the intercooler position looks ausome, nice work will be good when its finished |
Author: | sg [ Tue Oct 04, 2005 7:58 pm ] |
Post subject: | |
Niiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiice Benny... i feel the green eyed monster stirring in me..... jealousy rising ![]() |
Author: | awdmoke [ Tue Oct 04, 2005 9:01 pm ] |
Post subject: | |
WOW ! Didn't think you could do that with the intercooler ![]() |
Author: | cazmo [ Tue Oct 04, 2005 10:07 pm ] |
Post subject: | |
that look sweet mate. be good to find out how much more power you get out of it. got any pics of you new 13s on? |
Author: | Rising Star [ Tue Oct 04, 2005 10:12 pm ] |
Post subject: | |
where does the number plate go? make sure to save some money to bribe the cops cause there gonna pick on you somethin shocking with that intercooler like that, and remember in Queensland they can take your car if your "hooning" |
Author: | BLACKRZ_667 [ Tue Oct 04, 2005 10:28 pm ] |
Post subject: | |
Same in tas 1st offence 48hours 2nd offence 3 months 3rd offence gone i have sussed it out and know when to run lol jokes ![]() |
Author: | 998_Clubman [ Wed Oct 05, 2005 7:25 am ] |
Post subject: | |
umm yeah i know its a bit wow/rice/look at me, but i didnt want to jam somthing in the engine bay, honestly i cbf trying to, it was hard enough to work on without the turbo and all the ic pipes and bigger rad, and somthing allways broke when i go tmine on the road, hoses splitting etc.. but the number plate is a slimline, shouldnt have to much trouble finding a spot for it.. as for the cops and racing, i drive this car like a 60yo grandma, ask bungholio ![]() only other pic of wheels i have cam, ![]() |
Author: | JC [ Wed Oct 05, 2005 10:15 am ] |
Post subject: | |
998_Clubman wrote: as for the cops and racing, i drive this car like a 60yo grandma, ask bungholio......
I'm back to striped again. And yes, he drives like a 60yo grandma.....poorly ![]() ![]() Well atleast he won't have to drop the clutch into second to get wheelspin, turbo will take care of that. |
Author: | cazmo [ Wed Oct 05, 2005 9:34 pm ] |
Post subject: | |
rims look good. definatly better than the 12s. |
Author: | Gordo [ Fri Oct 07, 2005 6:35 pm ] |
Post subject: | |
The location of the intercooler looks sweet! In NSW that would never be allowed, it comes under the heading of somthin like "having sharp objects proturding" if you were to hit someone jeez it would do some damage.... What is the core size of that intercooler? |
Author: | Gordo [ Fri Oct 07, 2005 6:44 pm ] |
Post subject: | |
Also mate what turbo are you going to be using? Cheers Daniel |
Author: | 998_Clubman [ Fri Oct 07, 2005 7:07 pm ] |
Post subject: | |
hey its 90mm deep , and using a garrett t25, similar to the ones on the ca18's from the silvias and 180's.. ![]() |
Author: | GT1360 [ Fri Oct 07, 2005 7:21 pm ] |
Post subject: | |
Sorry I could not be assed reading it all.. HOW DO YOU GET THAT PAST REGO?? ![]() |
Author: | Wolfman [ Fri Oct 07, 2005 7:36 pm ] |
Post subject: | |
I doubt he did, no annual inspection up here ![]() ![]() |
Page 1 of 6 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |