low n blown wrote:
I haven't seen a Mk2 S block for $600 in Many Many years.
It all depends on where you are looking
| ausmini https://ausmini.com/forums/ |
|
| Cooper S block value https://ausmini.com/forums/viewtopic.php?f=2&t=99951 |
Page 1 of 2 |
| Author: | Chris.Williams [ Sat May 02, 2020 5:49 pm ] |
| Post subject: | Cooper S block value |
Hi, been offered a thick flange Cooper S block, currently on +60 bore. Can anyone shed some light on what it maybe worth? Thanks Chris |
|
| Author: | TK [ Sat May 02, 2020 6:21 pm ] |
| Post subject: | Re: Cooper S block value |
1000 to 1500 |
|
| Author: | drmini in aust [ Sat May 02, 2020 7:44 pm ] |
| Post subject: | Re: Cooper S block value |
I sold a +.040" MK 2 S one for $600, over 5 years ago. |
|
| Author: | Fallingbrick [ Sat May 02, 2020 8:53 pm ] |
| Post subject: | Re: Cooper S block value |
Probably what you're willing to pay for it! However, if you need to factor in a set of sleeves and fitment to return it to standard... |
|
| Author: | TK [ Sun May 03, 2020 4:46 pm ] |
| Post subject: | Re: Cooper S block value |
Not long ago a standard bore went for 2 |
|
| Author: | Bill B [ Sun May 03, 2020 7:13 pm ] |
| Post subject: | Re: Cooper S block value |
What might a new unused, thick flange short motor be worth? |
|
| Author: | Bill B [ Sun May 03, 2020 7:18 pm ] |
| Post subject: | Re: Cooper S block value |
Morris 1100 wrote: Richard says $600. Must be right. |
|
| Author: | gtogreen1969 [ Sun May 03, 2020 9:14 pm ] |
| Post subject: | Re: Cooper S block value |
Chris.Williams wrote: Hi, been offered a thick flange Cooper S block, currently on +60 bore. Can anyone shed some light on what it maybe worth? Thanks Chris For Cooper S engine blocks I reckon that you need to contact the various Mini shops to get an idea of price. Ebay, Guntree and Facebook are not a good way to price them as some are over valued by the sellers. The price for a bare block and caps does vary each over size as well. Matt Read usually has a few blocks laying around. Tel: (07) 3399 9999 Mob: 0407 135 656 |
|
| Author: | low n blown [ Mon May 04, 2020 7:55 am ] |
| Post subject: | Re: Cooper S block value |
Richard wrote: TK wrote: 1000 to 1500 In the real world they trade for around $600. I recently sold a few 40-60thou over. All went for $1200 -$1400. I also sold a Mk2 standard bore for $2k. I haven't seen a Mk2 S block for $600 in Many Many years. |
|
| Author: | 9YaTaH [ Mon May 04, 2020 8:04 am ] |
| Post subject: | Re: Cooper S block value |
low n blown wrote: I haven't seen a Mk2 S block for $600 in Many Many years. It all depends on where you are looking
|
|
| Author: | TK [ Mon May 04, 2020 10:47 am ] |
| Post subject: | Re: Cooper S block value |
"I recently sold a few 40-60thou over. All went for $1200 -$1400. I also sold a Mk2 standard bore for $2k." Greg said that he sold blocks for these prices, not what he asked for but got the dosh in his hand. A good indicator I think. |
|
| Author: | cooperess [ Mon May 04, 2020 11:12 am ] |
| Post subject: | Re: Cooper S block value |
I sold a Mk1 for $2000 in 2003. |
|
| Author: | p7676 [ Tue May 05, 2020 6:17 pm ] |
| Post subject: | Re: Cooper S block value |
last year there as a complete mk 1 cs and engine and box sell for |
|
| Author: | p7676 [ Tue May 05, 2020 6:20 pm ] |
| Post subject: | Re: Cooper S block value |
$3000 1 bid ebay |
|
| Author: | slide [ Tue May 05, 2020 6:53 pm ] |
| Post subject: | Re: Cooper S block value |
Are Mk1 blocks worth more than Mk2? I've got both and will probably end up selling one of them, both have their original steel cranks and rods. |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|