| ausmini https://ausmini.com/forums/ |
|
| Fitting valve seat inserts -VIC https://ausmini.com/forums/viewtopic.php?f=2&t=99422 |
Page 1 of 1 |
| Author: | Frog Johnson [ Mon Oct 21, 2019 9:47 pm ] |
| Post subject: | Fitting valve seat inserts -VIC |
Looking for recommendations for someone to fit inserts in Melbourne- East or Peninsula, but will go anywhere. The horror stories associated with poorly fitted seats popping out have spooked me somewhat, so I definitely want someone that will shrink them in with the correct interference etc. Also - I got some from Minispares for a look and the internal diameter is about 1mm smaller than the existing seat. I assume you grind it out after fitting to suit the valve being used, but how far can you go? I was going to use 30mm MED valves |
|
| Author: | 850man [ Tue Oct 22, 2019 4:43 am ] |
| Post subject: | Re: Fitting valve seat inserts -VIC |
Talk to Link Automotive in Mitcham. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|