From the Australian Morris 1100 workshop manual.
| ausmini https://ausmini.com/forums/ |
|
| Mini-matic help https://ausmini.com/forums/viewtopic.php?f=2&t=99369 |
Page 1 of 1 |
| Author: | Humphrey78 [ Mon Sep 30, 2019 11:12 am ] |
| Post subject: | Mini-matic help |
Hi I had some time with my mini-matic on the weekend and got it running after decades of gathering dust, after 30 seconds of cranking it ticked over and sat and idled beautifully. The next step is to drop the motor in the car and test out the auto under load. I'm missing a part that joins the selector cable to the gearbox and have had trouble finding a photo of it online or in my books. If I can't find one I am sure we can fabricate something similar, so would love some images of what I'm missing. Your help is always appreciated. Thanks Benn |
|
| Author: | Morris 1100 [ Mon Sep 30, 2019 4:53 pm ] |
| Post subject: | Re: Mini-matic help |
From the Australian Morris 1100 workshop manual.
|
|
| Author: | SteveOB [ Mon Sep 30, 2019 8:44 pm ] |
| Post subject: | Re: Mini-matic help |
I have a 68 Matic that I use daily so will try and take a pic tomorrow in the daylight for you |
|
| Author: | 68AUTO [ Mon Sep 30, 2019 8:46 pm ] |
| Post subject: | Re: Mini-matic help |
Here are some pics. If you're located in Melbourne you're welcome to come have a look. I have a few engines laying around that you can look at. Attachment: IMG_0611.JPG Attachment: IMG_0614.JPG Attachment: IMG_0615.JPG Attachment: IMG_0616.JPG Attachment: IMG_0617.JPG
|
|
| Author: | SteveOB [ Mon Sep 30, 2019 8:52 pm ] |
| Post subject: | Re: Mini-matic help |
taaaaaa, 68Auto, saved me crawling round in the carpark with a torch under there he he he 
|
|
| Author: | Humphrey78 [ Tue Oct 01, 2019 11:11 am ] |
| Post subject: | Re: Mini-matic help |
Thank you for the pictures they will be helpful. Where in Melbourne are you 68AUTO ? It would be good to see one in person and take some measurements. Thanks again. |
|
| Author: | 68AUTO [ Tue Oct 01, 2019 11:13 am ] |
| Post subject: | Re: Mini-matic help |
I'll PM you. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|