Does the outrigger have a direction it needs to be installed? Is there any movement side to side it has to deal with?
Sent from my SM-G950F using Tapatalk
| ausmini https://ausmini.com/forums/ |
|
| Outrigger bearing https://ausmini.com/forums/viewtopic.php?f=2&t=98822 |
Page 1 of 1 |
| Author: | bluehishouse [ Mon Jul 22, 2019 5:04 pm ] |
| Post subject: | Outrigger bearing |
Does the outrigger have a direction it needs to be installed? Is there any movement side to side it has to deal with? Sent from my SM-G950F using Tapatalk |
|
| Author: | drmini in aust [ Mon Jul 22, 2019 6:48 pm ] |
| Post subject: | Re: Outrigger bearing |
They are parallel rollers so will go either way around. Be aware that the bore of the outer ring changed some years ago. So if replacing the bearing, fit the new outer ring too. Don't leave the old one in like us old blokes often used to. |
|
| Author: | bluehishouse [ Mon Jul 22, 2019 7:15 pm ] |
| Post subject: | Re: Outrigger bearing |
Old one got punched out, no worries. Cheers doc. Sent from my SM-G950F using Tapatalk |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|