| ausmini https://ausmini.com/forums/ |
|
| Bore size https://ausmini.com/forums/viewtopic.php?f=2&t=98383 |
Page 1 of 1 |
| Author: | AWOODY [ Thu Mar 21, 2019 6:10 pm ] |
| Post subject: | Bore size |
I measured the bore at approximately 71.5 on a 1275 block what size is it 1293 , 1310 etc |
|
| Author: | cgo [ Thu Mar 21, 2019 6:25 pm ] |
| Post subject: | Re: Bore size |
71.5mm is 2.815" which is 35 thou over standard 2.780". 40 thou over is 1310cc |
|
| Author: | AWOODY [ Thu Mar 21, 2019 7:34 pm ] |
| Post subject: | Re: Bore size |
Thanks so it is probably 1310. |
|
| Author: | Silobin [ Fri Mar 22, 2019 2:47 pm ] |
| Post subject: | Re: Bore size |
Measured mine today at 71.3mm which I worked out to be 1297cc. |
|
| Author: | AWOODY [ Sat Mar 23, 2019 4:37 pm ] |
| Post subject: | Re: Bore size |
Even better !! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|