| ausmini https://ausmini.com/forums/ |
|
| where and how to route heater hoses https://ausmini.com/forums/viewtopic.php?f=2&t=97972 |
Page 1 of 1 |
| Author: | hpal [ Tue Nov 20, 2018 2:27 pm ] |
| Post subject: | where and how to route heater hoses |
I'm fitting an aftermarket heater into the mini to get through rego and need to get the heater hoses into the cab neatly, there is one hole available in the usual spot but the other is covered by the top engine steady, is there another suitable place people normally use? |
|
| Author: | Matt I [ Tue Nov 20, 2018 3:14 pm ] |
| Post subject: | Re: where and how to route heater hoses |
I have that engine steady fitted and ran both heater hoses through there - there is space for the second one to fit behind/under the bracket. Sent from my SM-G900I using Tapatalk |
|
| Author: | timmy201 [ Tue Nov 20, 2018 3:21 pm ] |
| Post subject: | Re: where and how to route heater hoses |
There are a couple of photos showing the routing here: https://classicregister.com/id-guides/h ... ni-1275-ls |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|