| ausmini https://ausmini.com/forums/ |
|
| Flasher unit positioning https://ausmini.com/forums/viewtopic.php?f=2&t=97948 |
Page 1 of 1 |
| Author: | Stibbsy [ Wed Nov 14, 2018 7:27 pm ] |
| Post subject: | Flasher unit positioning |
Where/how is the flasher unit secured under the parcel shelf? Is there a clip available to secure it? |
|
| Author: | Matt I [ Wed Nov 14, 2018 7:58 pm ] |
| Post subject: | Re: Flasher unit positioning |
I think the original units had a mounting tab and were bolted to something (someone on here may correct me). Mine cable tied to the pedal box... |
|
| Author: | Mick [ Wed Nov 14, 2018 8:14 pm ] |
| Post subject: | Re: Flasher unit positioning |
I seem to remember it was the side of the pedal box beneath the dash? The clicking transmits nicely to the metal to make it more audible when its bolted down. |
|
| Author: | gtogreen1969 [ Wed Nov 14, 2018 10:54 pm ] |
| Post subject: | Re: Flasher unit positioning |
Stibbsy wrote: Where/how is the flasher unit secured under the parcel shelf? Is there a clip available to secure it? Is yours a metal can with a mounting hole? viewtopic.php?f=2&t=96182 Attachment: Mini Blinker Cannister.jpg Attachment: My flasher can.jpg
|
|
| Author: | Stibbsy [ Thu Nov 15, 2018 10:57 am ] |
| Post subject: | Re: Flasher unit positioning |
Thanks for the replies. As for mine being a metal one - been a while since I have seen it amongst all my parts. Would be desirable to have a metal one. Trying to get it back on the road before it turns 50 years. |
|
| Author: | Stuwey [ Thu Nov 15, 2018 3:30 pm ] |
| Post subject: | Re: Flasher unit positioning |
Mine ('68 Deluxe) was a glass unit, in a small spring-clamp under the dash - retained by the bolts that hold the column drop bracket |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|