ausmini
https://ausmini.com/forums/

Tail light part numbers
https://ausmini.com/forums/viewtopic.php?f=2&t=97847
Page 1 of 1

Author:  Bill B [ Mon Oct 15, 2018 2:32 pm ]
Post subject:  Tail light part numbers

Can anyone tell me the part numbers for the Lucas Australia tail light assemblies that have the reversing light built into the orange turn indicators? That's 2 screw, small tail light 1970ish round-nose - not the later clubman style.

Author:  winabbey [ Mon Oct 15, 2018 3:19 pm ]
Post subject:  Re: Tail light part numbers

Bill B wrote:
Can anyone tell me the part numbers for the Lucas Australia tail light assemblies that have the reversing light built into the orange turn indicators? That's 2 screw, small tail light 1970ish round-nose - not the later clubman style.

Lucas 62957126 (RHS) and 62957127 (LHS). Also known as BMC part numbers AYA9149 and AYA9150 respectively.

They are exactly the same as AL136 non-reversing light bases except the single filament bulb holder is replaced by a twin filament bulb holder, same item as used in the stop/tail position. The easiest and cheapest way to make reversing light bases is to rob the stop/tail socket from another AL136 base or a Clubman base. The edge of the socket can be carefully prised off and then pinched back on the new base.

Author:  Bill B [ Tue Oct 16, 2018 9:25 am ]
Post subject:  Re: Tail light part numbers

Thanks winabbey.
Doing just that!

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/