| ausmini https://ausmini.com/forums/ |
|
| Front wiring loom (94 Japanese Rover) 4 black wires go where https://ausmini.com/forums/viewtopic.php?f=2&t=97835 |
Page 1 of 1 |
| Author: | 68AUTO [ Wed Oct 10, 2018 7:14 pm ] |
| Post subject: | Front wiring loom (94 Japanese Rover) 4 black wires go where |
Does anyone know what the 4 black wires in the front wiring loom are for? There is 1 thick wire and 3 thin wires. I am assuming the following: 1 x thick = headlamps 1 x thin = left indicator 1 x thin = right indicator 1 x thin = wiper motor The previous owner of my Mini was Dr Frankenstein. I should have probably bought a new loom but I'm beyond that and only need to work out where these 4 wires connect to. Thanks |
|
| Author: | Harley [ Wed Oct 10, 2018 8:30 pm ] |
| Post subject: | Re: Front wiring loom (94 Japanese Rover) 4 black wires go w |
Black were all earth wires on factory cars. |
|
| Author: | 68AUTO [ Wed Oct 10, 2018 8:34 pm ] |
| Post subject: | Re: Front wiring loom (94 Japanese Rover) 4 black wires go w |
That's right. Based on the wiring diagram I am assuming that they go to the above places - as earth. Other bits like the horns seem to earth directly to the body. |
|
| Author: | Harley [ Wed Oct 10, 2018 8:38 pm ] |
| Post subject: | Re: Front wiring loom (94 Japanese Rover) 4 black wires go w |
There isn't a lot that earths direct to body other than engine. Even the horn and lights generally have earth leads. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|