| ausmini https://ausmini.com/forums/ |
|
| mini dizzy again https://ausmini.com/forums/viewtopic.php?f=2&t=97438 |
Page 1 of 1 |
| Author: | p7676 [ Sun Jul 01, 2018 5:23 pm ] |
| Post subject: | mini dizzy again |
The clamping plate on the dizzy does it go below or above the dizzy its the plate with the long bolt ? Allen |
|
| Author: | drmini in aust [ Sun Jul 01, 2018 6:53 pm ] |
| Post subject: | Re: mini dizzy again |
Above. |
|
| Author: | Convertible Mini [ Tue Jul 03, 2018 6:50 am ] |
| Post subject: | Re: mini dizzy again |
And also make sure you have the plate with the correct face up. The side mounting lug or lugs have an offset to make the plate sit away from the boss around the distributor so it does not clamp on the lower edge of the distributor clamping radius. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|