| ausmini https://ausmini.com/forums/ |
|
| 1970 mini C.S https://ausmini.com/forums/viewtopic.php?f=2&t=97272 |
Page 1 of 1 |
| Author: | p7676 [ Tue May 29, 2018 12:20 pm ] |
| Post subject: | 1970 mini C.S |
Hello All, Anyone know where I can buy the bulb holders for the blinkers which fit into the speedo binnacle small round type probably green lens. They are hard to find. TY Allen |
|
| Author: | Bill B [ Tue May 29, 2018 12:41 pm ] |
| Post subject: | Re: 1970 mini C.S |
From what I can see on my 70 S, the globe-holder and globe push into a short plastic tube that seems to be either part of the binnacle moulding or includes the green lens and small chrome bezel. Do you just want the globe holder, or do you want the green lens and chrome bezel also? |
|
| Author: | p7676 [ Tue May 29, 2018 12:46 pm ] |
| Post subject: | Re: 1970 mini C.S |
I only want the lens I am fitting a new harness which has all the plug ins, the old dash was wood ,I have a new binnacle and I will have to drill 2 holes to fit the plastic tubes THANKS Allen |
|
| Author: | Bill B [ Tue May 29, 2018 2:01 pm ] |
| Post subject: | Re: 1970 mini C.S |
I believe those cut-glass style lenses are difficult to find now. Surprise! They were also used on Austin 1800s (maybe 1100s too?) in amber and red. These are modern Lucas and vaguely similar if it's any help. I am guessing the original ones were made in Aust only. http://www.autoelectricalspares.co.uk/l ... 1354-p.asp |
|
| Author: | winabbey [ Tue May 29, 2018 2:36 pm ] |
| Post subject: | Re: 1970 mini C.S |
The Lucas part number is 38191. They are available from various suppliers. Here's an Australian site. https://www.ebay.com.au/itm/Genuine-Luc ... 1759414431 So the new oval binnacle you have is undrilled? If so I can supply the engineering drawing with the precise location of those turn indicator lamp holes. |
|
| Author: | p7676 [ Tue May 29, 2018 3:08 pm ] |
| Post subject: | Re: 1970 mini C.S |
Drawing would be great, John Sneddon was going to let me measure of his car If I can get the drawing it will save me a drive and spending 2 hours chatting. P7676 |
|
| Author: | winabbey [ Tue May 29, 2018 3:23 pm ] |
| Post subject: | Re: 1970 mini C.S |
p7676 wrote: ... it will save me a drive and spending 2 hours chatting. ha ha.  I know what you mean.  Here's the measurements, all in inches of course. click once or twice to enlarge drawing. Attachment: AYA9170 Rework Instrument Nacelle YDO5 wm.jpg
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|