Sent from my iPhone using Tapatalk
| ausmini https://ausmini.com/forums/ |
|
| heater core 1970 C.S https://ausmini.com/forums/viewtopic.php?f=2&t=97086 |
Page 1 of 1 |
| Author: | p7676 [ Tue Apr 10, 2018 4:50 pm ] |
| Post subject: | heater core 1970 C.S |
Hello All, I am having trouble finding a new core or a good second hand one. Does anyone know where I can get a core. TY Allen |
|
| Author: | timmy201 [ Tue Apr 10, 2018 4:54 pm ] |
| Post subject: | Re: heater core 1970 C.S |
This one? https://minikingdomonline.com.au/produc ... r-s-mk1-2/ http://minisport.com.au/mini-cooper-s-heater-core |
|
| Author: | DavidE [ Tue Apr 10, 2018 5:17 pm ] |
| Post subject: | Re: heater core 1970 C.S |
timmy201 wrote: "and just requires inlet/ outlet tubes to be moved so it can be easily fitted."? |
|
| Author: | winabbey [ Tue Apr 10, 2018 5:41 pm ] |
| Post subject: | Re: heater core 1970 C.S |
While awaiting other responses I suggest you do a search on heater core or similar. I did and found this post where the owner replaced the core. Try a PM to him to see where he got it. viewtopic.php?f=3&t=95728&p=1023097 |
|
| Author: | MiniMat [ Tue Apr 10, 2018 9:22 pm ] |
| Post subject: | Re: heater core 1970 C.S |
Doug you are right, I did replace mine. The ones shown in the link fit our housings. I think the note about moving the inlet pipes refers to the Moke application only. Mat |
|
| Author: | Atay [ Wed Apr 11, 2018 5:35 am ] |
| Post subject: | Re: heater core 1970 C.S |
Have you tried John at MKO https://minikingdomonline.com.au/produc ... r-s-mk1-2/ |
|
| Author: | Anthony [ Wed Apr 11, 2018 2:08 pm ] |
| Post subject: | Re: heater core 1970 C.S |
I’m on the middle of having mine re cored and having a right angle put on the pipes, do you have the old one that can be repaired?? Sent from my iPhone using Tapatalk |
|
| Author: | Anthony [ Wed Apr 11, 2018 2:09 pm ] |
| Post subject: | Re: heater core 1970 C.S |
Sent from my iPhone using Tapatalk |
|
| Author: | gtogreen1969 [ Wed Apr 11, 2018 2:32 pm ] |
| Post subject: | Re: heater core 1970 C.S |
Anthony wrote: Sent from my iPhone using Tapatalk |
|
| Author: | p7676 [ Wed Apr 11, 2018 8:37 pm ] |
| Post subject: | Re: heater core 1970 C.S |
Yep I removed the tanks and the core is RS to fit a new core will cost $350.New one from John S $190. The radiator shop told me they cannot compete with the cost of new heater units . |
|
| Author: | Anthony [ Thu Apr 12, 2018 10:28 pm ] |
| Post subject: | Re: heater core 1970 C.S |
Mine was slightly cheaper but I had the inlet pipes moved too. I also questioned it. Expensive for such a small core. I couldn't see the correct one for my car. Bit the bullet and had it done. Haven't picked it up yet so I hope they did a good job. Have had radiators done by them before and turned out pretty good. Sent from my iPad using Tapatalk |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|