ausmini
https://ausmini.com/forums/

BMC Hydrolastic Pump Rebuild
https://ausmini.com/forums/viewtopic.php?f=2&t=96810		 Page 1 of 1
Author:  cooperess [ Wed Feb 14, 2018 1:21 pm ]
Post subject:  BMC Hydrolastic Pump Rebuild
I am in the process of rebuilding the above.
Can anyone help me in finding replacement clear tubing as my tubing is brittle and not clear.
Author:  Bill B [ Wed Feb 14, 2018 4:21 pm ]
Post subject:  Re: BMC Hydrolastic Pump Rebuild
Have you tried hydraulic repairers?
A business called Industrial Fittings Sales Ingleburn, NSW does lots of tubing and brass fitting etc. They list high pressure semi-rigid hose in black or natural (recommended PSI is 625) including 3/16, 1/4 and 5/16inch in cut lengths.
Author:  winabbey [ Wed Feb 14, 2018 4:32 pm ]
Post subject:  Re: BMC Hydrolastic Pump Rebuild
Bill B wrote:
Have you tried hydraulic repairers?

I agree. Try Enzed or Pirtek.

Actually I recently purchased some pressure hose for my hydro pump system at Bunnings. I have an air hose fitting on one end and use it to extract the fluid from a pumped up system into a container. While it's rated at 120psi it doesn't need to handle pressure that high. Depending on what part of the pump system your hose is located it may need to support a higher pressure.

https://www.bunnings.com.au/kinetic-16m ... e_p4920233
Author:  Bill B [ Wed Feb 14, 2018 6:30 pm ]
Post subject:  Re: BMC Hydrolastic Pump Rebuild
winabbey wrote:
Bill B wrote:
Have you tried hydraulic repairers?

I agree. Try Enzed or Pirtek.


Is Ended still in business?
Campbelltown Pirtek has at least one member who understands hydrolastic and has helped customers build their own pumps as well as repair displacers.
Author:  i got a mini [ Wed Feb 14, 2018 8:04 pm ]
Post subject:  Re: BMC Hydrolastic Pump Rebuild
my brother replaced his bubbaclubby on hear pm him and ask him he could possible help you out
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/