| ausmini https://ausmini.com/forums/ |
|
| Hardy Spicer diff output joint collets https://ausmini.com/forums/viewtopic.php?f=2&t=96809 |
Page 1 of 1 |
| Author: | ianscampbell [ Wed Feb 14, 2018 12:54 pm ] |
| Post subject: | Hardy Spicer diff output joint collets |
Hi there, - Can anyone advise which way round these 88G493 1/2 moon collets need to be fitted? They fit in the groove milled into the splined section of the diff side of the output coupling & stop the neoprene seal 22A1566 from being squashed/melted. There is a relieved side on the inner circumference on one side, & a butted face on the other side. IE, they are flat one side & dished the other. So which way around? Any help would be great! Thanks, Ian. |
|
| Author: | TheMiniMan [ Wed Feb 14, 2018 4:03 pm ] |
| Post subject: | Re: Hardy Spicer diff output joint collets |
collett recess faces the inner, so flat side faces outwards |
|
| Author: | ianscampbell [ Wed Feb 14, 2018 7:20 pm ] |
| Post subject: | Re: Hardy Spicer diff output joint collets |
Thanks Mini Man, - that's what I needed to know! Well done.. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|