Cheers
| ausmini https://ausmini.com/forums/ |
|
| Spark plug adjustment https://ausmini.com/forums/viewtopic.php?f=2&t=96403 |
Page 1 of 1 |
| Author: | shnitzee [ Sun Dec 03, 2017 6:07 pm ] |
| Post subject: | Spark plug adjustment |
Hi all Do I need to adjust the gaps on my plugs when installing electronic ignition kit + upgraded ignition coil? Thanks Eiles |
|
| Author: | gtogreen1969 [ Sun Dec 03, 2017 6:30 pm ] |
| Post subject: | Re: Spark plug adjustment |
You can easily go out to 30thou from the std 25thou |
|
| Author: | shnitzee [ Sun Dec 03, 2017 6:35 pm ] |
| Post subject: | Re: Spark plug adjustment |
Cheers
|
|
| Author: | Besser [ Tue Dec 05, 2017 7:53 am ] |
| Post subject: | Re: Spark plug adjustment |
If you're going for maximum gap, don't forget to index them. |
|
| Author: | shnitzee [ Thu Dec 07, 2017 9:35 pm ] |
| Post subject: | Re: Spark plug adjustment |
How do i go about doing that? |
|
| Author: | drmini in aust [ Fri Dec 08, 2017 6:14 am ] |
| Post subject: | Re: Spark plug adjustment |
You put shims under each plug so the electrodes all point the same in the chamber. It's a V8 thing, not sure it makes a difference in an A series with siamesed ports. |
|
| Author: | shnitzee [ Fri Dec 08, 2017 8:17 pm ] |
| Post subject: | Re: Spark plug adjustment |
Thanks for info dr. Never knew such a thing existed.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|