| ausmini https://ausmini.com/forums/ |
|
| Bolt/Nut size for rear seat base https://ausmini.com/forums/viewtopic.php?f=2&t=95489 |
Page 1 of 1 |
| Author: | 8700s14 [ Tue May 30, 2017 3:49 pm ] |
| Post subject: | Bolt/Nut size for rear seat base |
I feel it is a bit silly to start a whole thread for such a trivial question, but couldn't think of any other way to ask! What size is the bolt/nut for the rear seat base? I dug through what seemed like 50 different nuts that came with my car and none of them fit 
|
|
| Author: | timmy201 [ Tue May 30, 2017 3:50 pm ] |
| Post subject: | Re: Bolt/Nut size for rear seat base |
Some discussion here: viewtopic.php?f=2&t=95019 |
|
| Author: | 8700s14 [ Tue May 30, 2017 4:07 pm ] |
| Post subject: | Re: Bolt/Nut size for rear seat base |
timmy201 wrote: Some discussion here: viewtopic.php?f=2&t=95019 Great, thanks, don't know how I missed it! For anyone else playing at home: http://www.ebay.com.au/itm/Qty-2-Wing-Nut-10-32-3-16-UNF-Imperial-Stainless-Steel-304-A2-70-SS-/231740044071?hash=item35f4c87327:g:Y3wAAOSwA4dWN6Uc this is the right thread, not quite 100% accurate in its style but close enough for me. |
|
| Author: | TK [ Tue May 30, 2017 7:18 pm ] |
| Post subject: | Re: Bolt/Nut size for rear seat base |
$8.10 each? ha ha ha 
|
|
| Author: | timmy201 [ Tue May 30, 2017 7:21 pm ] |
| Post subject: | Re: Bolt/Nut size for rear seat base |
For a pair posted.. still much dearer than the local bolt shop |
|
| Author: | Fallingbrick [ Tue May 30, 2017 7:29 pm ] |
| Post subject: | Re: Bolt/Nut size for rear seat base |
TK wrote: $8.10 each? ha ha ha ten for $13.50 or fifty for $35.10! Group purchase in order 
|
|
| Author: | Fallingbrick [ Tue May 30, 2017 7:31 pm ] |
| Post subject: | Re: Bolt/Nut size for rear seat base |
or a box of 2000 of the original pressed type... http://www.ebay.com.au/itm/Shorpioen-11NWS-No-10-32-Stamped-Wing-Nut-Zinc-Box-of-2000-/232300171789?hash=item36162b520d:g:GQAAAOSwc-tY7eNs |
|
| Author: | 8700s14 [ Tue May 30, 2017 8:45 pm ] |
| Post subject: | Re: Bolt/Nut size for rear seat base |
Fallingbrick wrote: or a box of 2000 of the original pressed type... http://www.ebay.com.au/itm/Shorpioen-11NWS-No-10-32-Stamped-Wing-Nut-Zinc-Box-of-2000-/232300171789?hash=item36162b520d:g:GQAAAOSwc-tY7eNs Reading the other thread it seems that they are not quite the same as the original. |
|
| Author: | cooperess [ Wed May 31, 2017 6:37 pm ] |
| Post subject: | Re: Bolt/Nut size for rear seat base |
My 1970 Cooper 'S' had a wing nut screw holding the centre front rear seat, if that helps. |
|
| Author: | Fallingbrick [ Wed Jun 07, 2017 6:56 pm ] |
| Post subject: | Re: Bolt/Nut size for rear seat base |
8700s14 wrote: Fallingbrick wrote: or a box of 2000 of the original pressed type... http://www.ebay.com.au/itm/Shorpioen-11NWS-No-10-32-Stamped-Wing-Nut-Zinc-Box-of-2000-/232300171789?hash=item36162b520d:g:GQAAAOSwc-tY7eNs Reading the other thread it seems that they are not quite the same as the original. True, but a pressed steel type is a little closer to the original
|
|
| Author: | TK [ Wed Jun 07, 2017 7:48 pm ] |
| Post subject: | Re: Bolt/Nut size for rear seat base |
"For anyone else playing at home: http://www.ebay.com.au/itm/Qty-2-Wing-N ... SwA4dWN6Uc this is the right thread, not quite 100% accurate in its style but close enough for me." not even 100% in thread size. |
|
| Author: | 8700s14 [ Thu Jun 08, 2017 8:10 am ] |
| Post subject: | Re: Bolt/Nut size for rear seat base |
TK wrote: "For anyone else playing at home: http://www.ebay.com.au/itm/Qty-2-Wing-N ... SwA4dWN6Uc this is the right thread, not quite 100% accurate in its style but close enough for me." not even 100% in thread size. Is it not 10-32 UNF? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|