| ausmini https://ausmini.com/forums/ |
|
| Delete please https://ausmini.com/forums/viewtopic.php?f=2&t=94860 |
Page 1 of 1 |
| Author: | minimans [ Mon Feb 13, 2017 11:50 am ] |
| Post subject: | Re: LCB Header Bracket |
Attaches to the side cover bolt at rear lower bolt. you will have to bend it to fit or make another bracket to bolt them together |
|
| Author: | drmini in aust [ Mon Feb 13, 2017 4:08 pm ] |
| Post subject: | Re: LCB Header Bracket |
Yes, the bottom one. |
|
| Author: | 1071 S [ Mon Feb 13, 2017 5:27 pm ] |
| Post subject: | Re: LCB Header Bracket |
I would suggest you look for the bracket sold by some of the usual suspects that attaches to at least 2 of the flange bolts... Your exhaust tab then attaches to this bracket. (or make one ?) I have found the single bolt inadequate at times to withstand the forces the exhaust can apply. The thread in the alloy diff casting will eventually give up... Cheers, Ian |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|