| ausmini https://ausmini.com/forums/ |
|
| Club plate size https://ausmini.com/forums/viewtopic.php?f=2&t=94564 |
Page 1 of 1 |
| Author: | Humphrey78 [ Wed Jan 04, 2017 11:46 am ] |
| Post subject: | Club plate size |
Can someone please tell me the dimensions of a Victorian Club rego plate. I'm thinking of buying a backing plate from mini spares for the back of my van and am not if it will be too high. Thanks http://www.minispares.com/product/classic/8B12390.aspx |
|
| Author: | Flute [ Wed Jan 04, 2017 12:23 pm ] |
| Post subject: | Re: Club plate size |
Club Plate is the same dimensions as standard size normal issue plate. Just looked at link, that will be for pommy plates that are the size of our Euro plates so doubt it will be right. Standard plates here are 14.5 x 5.25 inches (roughly 37 x 13 cms). That one is 21.5 x 5.5 inches (roughly 54 x 14 cms) so too long and too high unless you want it to fit inside that area. |
|
| Author: | Humphrey78 [ Wed Jan 04, 2017 1:18 pm ] |
| Post subject: | Re: Club plate size |
Flute wrote: Club Plate is the same dimensions as standard size normal issue plate. Just looked at link, that will be for pommy plates that are the size of our Euro plates so doubt it will be right. Standard plates here are 14.5 x 5.25 inches (roughly 37 x 13 cms). That one is 21.5 x 5.5 inches (roughly 54 x 14 cms) so too long and too high unless you want it to fit inside that area. Thanks, it did seem it might be tight and look a bit odd. I will make a replacement plate holder and get it painted to match the van colour. Cheers |
|
| Author: | DavidE [ Wed Jan 04, 2017 1:59 pm ] |
| Post subject: | Re: Club plate size |
Humphrey78 wrote: Flute wrote: Club Plate is the same dimensions as standard size normal issue plate. Just looked at link, that will be for pommy plates that are the size of our Euro plates so doubt it will be right. Standard plates here are 14.5 x 5.25 inches (roughly 37 x 13 cms). That one is 21.5 x 5.5 inches (roughly 54 x 14 cms) so too long and too high unless you want it to fit inside that area. Thanks, it did seem it might be tight and look a bit odd. I will make a replacement plate holder and get it painted to match the van colour. Cheers Why not use some polished aluminium sheet of suitable thickness and affix the club plate to that. This is how I handled my ACT club plate. Attachment: DSC_9202s.jpg
|
|
| Author: | simon k [ Wed Jan 04, 2017 9:13 pm ] |
| Post subject: | Re: Club plate size |
DavidE wrote: Humphrey78 wrote: Flute wrote: Club Plate is the same dimensions as standard size normal issue plate. Just looked at link, that will be for pommy plates that are the size of our Euro plates so doubt it will be right. Standard plates here are 14.5 x 5.25 inches (roughly 37 x 13 cms). That one is 21.5 x 5.5 inches (roughly 54 x 14 cms) so too long and too high unless you want it to fit inside that area. Thanks, it did seem it might be tight and look a bit odd. I will make a replacement plate holder and get it painted to match the van colour. Cheers Why not use some polished aluminium sheet of suitable thickness and affix the club plate to that. This is how I handled my ACT club plate. Attachment: DSC_9202s.jpg cos the vic historic plate would cover it completely... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|