Bypass is alegedly 5/8-16 Whitworth.
5/8-16 UNS works fine.
| ausmini https://ausmini.com/forums/ |
|
| Thread size of water temp hole in a 12g206 head https://ausmini.com/forums/viewtopic.php?f=2&t=94553 |
Page 1 of 1 |
| Author: | mattsmadmini [ Tue Jan 03, 2017 2:08 pm ] |
| Post subject: | Thread size of water temp hole in a 12g206 head |
anyone? |
|
| Author: | Stuwey [ Tue Jan 03, 2017 2:48 pm ] |
| Post subject: | Re: Thread size of water temp hole in a 12g206 head |
I always thought sender units were 5/8 UNF... |
|
| Author: | drmini in aust [ Tue Jan 03, 2017 4:26 pm ] |
| Post subject: | Re: Thread size of water temp hole in a 12g206 head |
Yep. |
|
| Author: | justfanginaround [ Tue Jan 03, 2017 5:45 pm ] |
| Post subject: | Re: Thread size of water temp hole in a 12g206 head |
and the bypass thread is ? { sorry for hi-jack but this info in the 1 spot will help me with a mod I have planed } |
|
| Author: | Tim I [ Tue Jan 03, 2017 8:21 pm ] |
| Post subject: | Re: Thread size of water temp hole in a 12g206 head |
Bypass is alegedly 5/8-16 Whitworth. 5/8-16 UNS works fine.
|
|
| Author: | drmini in aust [ Wed Jan 04, 2017 7:26 am ] |
| Post subject: | Re: Thread size of water temp hole in a 12g206 head |
Matt if you can't buy a temp sender fitting, drop by and I will make you one. |
|
| Author: | RNY997 [ Wed Jan 04, 2017 11:02 am ] |
| Post subject: | Re: Thread size of water temp hole in a 12g206 head |
5/8 UNF |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|