| ausmini https://ausmini.com/forums/ |
|
| Weber 40 on a 1098? https://ausmini.com/forums/viewtopic.php?f=2&t=94324 |
Page 1 of 1 |
| Author: | drmini in aust [ Wed Nov 30, 2016 11:48 am ] |
| Post subject: | Re: Weber 40 on a 1098? |
Stock 1098, yes it will work if the chokes are not too big. I put a 40 Dellorto on a worked 1098 (1152cc) years ago and it made 52HP at the wheels during ausmini dyno day in Castle Hill. I think it had 32mm chokes in it, a 295 head and RE13 cam. LCB exhaust. You would want 30 or smaller chokes for a stock 1098. Really though, you should mod the motor first- cam, valves, valve springs, head work. |
|
| Author: | mattsmadmini [ Wed Nov 30, 2016 3:28 pm ] |
| Post subject: | Re: Weber 40 on a 1098? |
My untuned 1152 had a 45 on it with 36 chokes and made 51?hp @ the wheels... Open 202 and a wild high lift scatter cam... Do it... That sound... |
|
| Author: | Convertible Mini [ Wed Nov 30, 2016 4:30 pm ] |
| Post subject: | Re: Weber 40 on a 1098? |
And don't forget a good set of Ear Muffs. |
|
| Author: | drmini in aust [ Wed Nov 30, 2016 5:40 pm ] |
| Post subject: | Re: Weber 40 on a 1098? |
mattsmadmini wrote: My untuned 1152 had a 45 on it with 36 chokes and made 51?hp @ the wheels... Open 202 and a wild high lift scatter cam... Do it... That sound... Might be time for another ausmini dyno day? It's been a while since the last one! 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|