| ausmini https://ausmini.com/forums/ |
|
| Brake hose copper washer drums https://ausmini.com/forums/viewtopic.php?f=2&t=94207 |
Page 1 of 1 |
| Author: | Asiemek [ Sat Nov 12, 2016 5:55 pm ] |
| Post subject: | Brake hose copper washer drums |
Do i use a copper washer at the slave cylinder end for front drum brakes when connecting the flixi hose, or Is it suppose to seal on a taper without a washer. |
|
| Author: | drmini in aust [ Sat Nov 12, 2016 5:58 pm ] |
| Post subject: | Re: Brake hose copper washer drums |
Cooper washer on hose end. Same on back brakes, and clutch slave cylinder. These threads are 3/8 UNF, so are not tapered. |
|
| Author: | Asiemek [ Sat Nov 12, 2016 7:19 pm ] |
| Post subject: | Re: Brake hose copper washer drums |
drmini in aust wrote: Cooper washer on hose end. Same on back brakes, and clutch slave cylinder. These threads are 3/8 UNF, so are not tapered. Thanks for that |
|
| Author: | Morbo28 [ Mon Nov 14, 2016 5:53 am ] |
| Post subject: | Re: Brake hose copper washer drums |
drmini in aust wrote: Cooper washer... Muscle memory Sent from my Nexus 6P using Tapatalk |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|