ausmini https://ausmini.com/forums/ |
|
Grille Painting https://ausmini.com/forums/viewtopic.php?f=2&t=94171 |
Page 1 of 1 |
Author: | Hobson [ Mon Nov 07, 2016 10:42 am ] |
Post subject: | Grille Painting |
Question for those who have repainted/refreshed their grilles. Satin or Matt?? and what process did you use? |
Author: | peterb [ Mon Nov 07, 2016 7:41 pm ] |
Post subject: | Re: Grille Painting |
Rub down, etch and paint. Satin looks better than matt and tends not to look 'dirty'. |
Author: | 78Clubbie [ Tue Nov 08, 2016 6:53 pm ] |
Post subject: | Re: Grille Painting |
peterb wrote: Rub down, etch and paint. Satin looks better than matt and tends not to look 'dirty'. +1 for Satin. I masked up and painted with a can. |
Author: | goodie [ Wed Nov 09, 2016 9:16 am ] |
Post subject: | Re: Grille Painting |
I had to go back into my gallery and check mine , i've used gloss black , rubbed back , masked up, (that'll test you ![]() ![]() |
Author: | Hobson [ Wed Nov 09, 2016 11:39 am ] |
Post subject: | Re: Grille Painting |
goodie wrote: I had to go back into my gallery and check mine , i've used gloss black , rubbed back , masked up, (that'll test you ![]() ![]() Looks good, although I was thinking along the satin route, I did send an email off to a chrome(r) and powdercoater to see what they would come up with. Got a close up of the badge?? I have 2 "spares" that have 2 silvers of metalic blue in the long cutouts |
Author: | 78Clubbie [ Wed Nov 09, 2016 6:22 pm ] |
Post subject: | Re: Grille Painting |
goodie wrote: (that'll test you ![]() Indeed it will ![]() ![]() Not as shiny as Goodies ![]() |
Author: | goodie [ Thu Nov 10, 2016 6:40 am ] |
Post subject: | Re: Grille Painting |
I had a few grilles that i tidied up at the time i done the above one for my van, as for the centre badge, I polished them first ,wiped them down with Prepsol ,then masked up the long lines and hand painted them with a fine art brush and hobby paint , i just took the badge with me and tried to pick a paint colour as close as i could . |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |