| ausmini https://ausmini.com/forums/ |
|
| Brake Cylinders from Mini Spares - anyone else had issues?? https://ausmini.com/forums/viewtopic.php?f=2&t=93901 |
Page 1 of 1 |
| Author: | Asiemek [ Sun Oct 02, 2016 12:57 pm ] |
| Post subject: | Brake Cylinders from Mini Spares - anyone else had issues?? |
bought a set of front brake cylinders from mini spares uk but found the securing bolt holes don't match my backing plates. Did I get the wrong ones? part numbers are GWC126MS GWC127MS fitting to a 65 deluxe |
|
| Author: | drmini in aust [ Sun Oct 02, 2016 2:45 pm ] |
| Post subject: | Re: Brake Cylinders from Mini Spares - anyone else had issue |
Check the cylinder bores. 15/16" ones are slightly different hole centres to the 1" ones So they don't get mixed. File the backplate holes, or swap cylinders. |
|
| Author: | Asiemek [ Sun Oct 02, 2016 6:12 pm ] |
| Post subject: | Re: Brake Cylinders from Mini Spares - anyone else had issue |
Mmmmmm thanks for the reply will have a look further into this. Does it matter which one i install? |
|
| Author: | Scoop [ Sun Oct 02, 2016 6:30 pm ] |
| Post subject: | Re: Brake Cylinders from Mini Spares - anyone else had issue |
At least make sure they are all the same! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|