| ausmini https://ausmini.com/forums/ |
|
| Electrical help https://ausmini.com/forums/viewtopic.php?f=2&t=93843 |
Page 1 of 1 |
| Author: | ricksmini [ Mon Sep 26, 2016 7:12 pm ] |
| Post subject: | Electrical help |
Need help please. I've got an electronic Aldon y distributor and it keeps blowing the module in it. Any able to help me with the problem? The first one lasted one start, the second lasted about 6 starts. The only wiring damage I can see is on the number 3 peg on the back of the ignition where the brown and blue wire goes is brown at the base. |
|
| Author: | oldblade [ Mon Sep 26, 2016 8:42 pm ] |
| Post subject: | Re: Electrical help |
How do you know the module is blown ? Sorry i don't have the Aldon but i did install my accuspark with blackbox and got it going first go |
|
| Author: | Convertible Mini [ Mon Sep 26, 2016 8:47 pm ] |
| Post subject: | Re: Electrical help |
99% of times Module blows because the Coil is drawing too much Current. Meaning it is too low a resistance or is intermittently shorting. Try a Known new Coil with primary resistance above 1.5 Ohms. Like a Bosch GT40. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|